Airmar CM599LH Transducer Pocket Mount Dual Band 2-3kW

Overview

Who This Is For: Deep-water hunters targeting swordfish, tuna, and offshore species who need maximum depth penetration combined with high-resolution target separation. This transducer is built for boats 25 feet and larger running serious 2-3 kW systems that can push sound down to 10,000 feet and still read what's happening in the water column.

Product Summary: The CM599LH is a dual-band CHIRP-ready transducer that gives you the full range your boat needs in one mount. Low frequency (28-60 kHz) punches through to extreme depths with a wide cone; high frequency (130-210 kHz) delivers the detail to distinguish individual fish and structure in shallower zones. Pocket-mounted in your wet box or cavity, it handles any deadrise and connects straight to your display with bare wire leads.

Key Features

• 2-3 kW Power Rating — runs at full output on serious offshore systems — gives you the punch needed to reach and resolve targets at extreme depths where most standard transducers fade out.
• Low Frequency 28-60 kHz with 24-Element Array — delivers exceptional deep-water penetration down to 10,000 feet — you'll mark structure and baitfish on the bottom when you're fishing swordfish and tuna in open ocean.
• High Frequency 130-210 kHz with 8° to 4° Beamwidth — produces razor-sharp resolution at depths to 1,500 feet — narrow beam means you see individual targets, not blobs, when you're working suspended fish or tight cover.
• 112 kHz Total Bandwidth — covers all your productive frequencies (50 kHz and 200 kHz) plus everything in between — flexibility to dial in the exact frequency your sonar unit works best at without swapping transducers.
• CHIRP-Ready Dual-Band — works with modern CHIRP-capable displays for exceptional target separation and interference rejection — turns your sonar into a precision tool instead of a guessing game.
• Pocket/Keel Mount Design with Resin Housing — installs into a cavity or welded tank with curved edges for clean wet-box integration — no thru-hull holes, no seacock maintenance, cleaner hull installation on larger vessels.
• Fast-Response Temperature Sensing — reads water temp in real time as you fish — critical for offshore work where thermoclines and current boundaries determine where fish hold.
• 49-Foot Cable — gives you routing flexibility on larger hulls — long enough to run from wet box to helm without splicing or jerry-rigging connections.

Specs & What's Included

Compatibility: This is a bare-wire transducer — no connector attached. It connects directly to any display system that accepts bare-wire transducer input at 2-3 kW power levels. You'll need to know your display's transducer input type and wire the connector yourself or have a marine electrician handle it. If you're not certain whether this integrates with your existing setup, call or text us at (833) 831-4077 — we'll walk you through it straight.

In the Box: CM599LH pocket-mount transducer with 49-foot cable and bare wire leads. Connector hardware is not included — you'll terminate the cable to your display's connector type.