{"title":"Transducers","description":"\u003cp\u003eTransducers are the foundation of your sonar system — and the most overlooked upgrade on most boats. The transducer is what actually sends and receives sonar signals, which means the quality of what you see on your display is only as good as the transducer feeding it. Shop our full lineup of transom-mount, thru-hull, and in-hull transducers from Airmar and Humminbird, covering everything from entry-level replacements to high-performance upgrades for serious anglers. Whether you're chasing walleye on inland lakes, targeting structure in deep water, or running MEGA Imaging on a bass boat, there's a transducer built for your setup. Not sure which one is compatible with your display or hull type? Use our Transducer Selector Tool to find your match, or reach out and we'll spec it out for you.\u003c\/p\u003e","products":[{"product_id":"airmar-599-transducer-low-high-frequency-chirp-in-hull","title":"Airmar 599 Transducer Low High Frequency CHIRP In-Hull","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eBuilt for serious inshore and offshore anglers who fish structure-heavy water and need maximum sonar flexibility in a single installation. Whether you're running canyon edge on a deep-water charter, hunting suspended gamefish in coastal bays, or working structure in moderate depths, this transducer pairs low and high frequency into one footprint — eliminating the compromise of choosing between wide coverage and fine detail.\u003c\/p\u003e\n\u003cp\u003eThe Airmar 599 is a dual-frequency CHIRP transducer that broadcasts across 112 kHz of total bandwidth from one in-hull mount. That means you get traditional fishing frequencies (28, 38, 50, 200 kHz) plus everything in between, with 5 to 10 times greater resolution than single-frequency units. You'll distinguish individual baitfish from gamefish, read bottom composition, and track structure with precision. For tournament and charter operations, one transducer doing the work of two saves installation complexity, weight, and cost.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-Frequency CHIRP Sonar\u003c\/strong\u003e — broadcasts across 28-60 kHz (low) and 130-210 kHz (high) in one transducer — gives you the flexibility to switch between wide-angle shallow structure and tight high-resolution deep-water detail without swapping hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e112 kHz Total Bandwidth\u003c\/strong\u003e — one installation covers all popular fishing frequencies plus continuous sweep across the spectrum — means more sonar information on screen with fewer moving parts and no dead zones between frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Beamwidth\u003c\/strong\u003e — low frequency cones from 23° to 9°, high frequency from 8° to 4° — lets you match your cone angle to water depth and structure type, improving target separation and bottom clarity in real conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth Capability to 10,000 Feet\u003c\/strong\u003e — in-hull design rated for deep-water canyon and seamount tracking — opens up offshore opportunities most recreational anglers never attempt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn-Hull Installation\u003c\/strong\u003e — mounts inside solid fiberglass hulls with 0° to 22° deadrise — cleaner than transom, no through-hull holes, and no performance loss in speed or sea state.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAll Mounting Hardware Included\u003c\/strong\u003e — tank and fasteners supplied — you get everything needed to install; no hunting for adapters or brackets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs \u0026amp; What's Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e This is a depth-only transducer compatible with any fishfinder or multifunction display that accepts Airmar CHIRP transducers via appropriate connectors. Your sounder must be CHIRP-capable to unlock the full bandwidth advantage. Not sure if this works with your setup? Call or text us at (833) 831-4077 — we'll tell you straight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn the Box:\u003c\/strong\u003e Transducer housing with epoxy acoustic window, mounting tank, all fastening hardware, and installation instructions. Connector is not included — order separately based on your display's connector type (Garmin, Simrad, Humminbird, or Lowrance compatibility varies).\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":45764296769593,"sku":"64842","price":6260.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2685\/5225\/files\/64842XL.jpg?v=1777401225"},{"product_id":"airmar-b117-transducer-50200-khz-thru-hull","title":"Airmar B117 Transducer 50\/200 kHz Thru-Hull","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eBuilt for anglers running smaller center console or open boats up to 25 feet who need reliable depth and temperature on a tight budget. If you're fishing freshwater or inshore without needing high-frequency imaging, the B117 gives you the core sonar you need without the expense and complexity of a full transducer package.\u003c\/p\u003e\n\u003cp\u003eThis is a straightforward thru-hull transducer with dual-frequency performance and bulletproof compatibility with Simrad, Lowrance, and B\u0026amp;G systems. The nearly-flush bronze housing sits tight against your hull, drags minimal water, and stays out of the way if someone steps near it. You get 50 kHz for deep water reach and 200 kHz for detail in shallower zones — everything a working angler needs to mark bottom, structure, and fish.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50\/200 kHz dual-frequency\u003c\/strong\u003e — 50 kHz punches down to 1,200 feet with a wide 45° beam to cover water fast; 200 kHz locks tight with a 12° beam for detail in shallower water down to 700 feet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e600W peak power\u003c\/strong\u003e — enough punch to cut through noise and deliver clean returns in both fresh and salt water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-profile bronze housing\u003c\/strong\u003e — only 5 mm extends beyond the hull, minimizing drag and protecting the transducer if someone steps on it. Bronze won't corrode in saltwater applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRight-angle cable exit\u003c\/strong\u003e — saves space in your bilge and keeps the cable protected from snagging or getting stepped on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible hull mounting\u003c\/strong\u003e — rubber washer included to seal against irregular surfaces. Fits fiberglass or wood hulls with deadrise angles up to 12°, though performance is best through 7°.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth only or depth and temperature output\u003c\/strong\u003e — choose the data you need for your fishing style.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs \u0026amp; What's Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e This transducer is wired with a 9-pin DT connector and works directly with Simrad, Lowrance, and B\u0026amp;G systems. If you're running one of those platforms and your sounder has a standard transducer port, this plugs in without adapters. Not sure if this works with your setup? Call or text us at (833) 831-4077 — we'll tell you straight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat You're Installing:\u003c\/strong\u003e The B117 transducer only. You'll need a compatible sounder head unit already mounted in your boat. Requires a 2-inch thru-hull hole.\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":45764296835129,"sku":"97557","price":319.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2685\/5225\/files\/97557XL.jpg?v=1777401227"},{"product_id":"airmar-b117-transducer-50200khz-dual-frequency","title":"Airmar B117 Transducer 50\/200kHz Dual Frequency","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWho This Is For:\u003c\/strong\u003e Recreational anglers and boaters running fiberglass or wood hulls up to 26 feet who need solid depth and temperature capability without overcomplicating their setup. If you fish inland waters or coastal areas where you're not pushing extreme depths, this transducer delivers everything you need at entry-level money.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Summary:\u003c\/strong\u003e The B117 is a straightforward dual-frequency transducer that gives you 50 kHz for deep reach and 200 kHz for detail in shallower water. At 600 watts of power, it's got enough punch to read structure and bottom composition in most freshwater and light saltwater conditions. The low-profile bronze housing sits nearly flush with your hull—only 5 mm protruding—so it won't slow you down, and you get the option of adding fast-response water temperature sensing to monitor conditions on the fly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-frequency ceramic element (50\/200 kHz)\u003c\/strong\u003e — switches between a wide 45° beam for depth performance down to 1200 feet and a narrow 12° beam for detail down to 700 feet — lets you choose between coverage and precision depending on what you're fishing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e600 watts of power\u003c\/strong\u003e — solid output that cuts through noise and delivers clean readings in a range of water conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional fast-response temperature sensing\u003c\/strong\u003e — monitors water temperature in real time so you can track seasonal patterns and follow baitfish movement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-profile bronze housing\u003c\/strong\u003e — minimal hull projection (5 mm) reduces drag and keeps your boat running clean, especially important on smaller craft where hydrodynamics matter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRight-angle cable exit\u003c\/strong\u003e — the connector comes out perpendicular to the transducer body, saving space below deck and protecting the unit if someone steps on it during maintenance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible hull mounting system\u003c\/strong\u003e — includes a rubber washer that lets you tighten the hull nut securely even on irregular or curved surfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs \u0026amp; What's Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e The B117 is built for fiberglass and wood-hulled boats. Bronze housing is standard; plastic (P319) and stainless steel (SS60) models are available to match your specific hull material. Best performance through 7° deadrise; accommodates hulls up to 12° deadrise. Maximum vessel length is 26 feet. Requires a 2-inch diameter thru-hull mounting hole. Not sure if this works with your boat or sounder? Call or text us at (833) 831-4077 — we'll tell you straight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn the Box:\u003c\/strong\u003e B117 transducer with ceramic dual-frequency element, rubber hull mounting washer, and right-angle connector cable. Your fish finder head unit is sold separately—the B117 connects to any compatible sounder via standard cable.\u003c\/p\u003e\n","brand":"Airmar","offers":[{"title":"Default Title","offer_id":45764296900665,"sku":"107453","price":319.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2685\/5225\/files\/107453XL.jpg?v=1777401229"},{"product_id":"airmar-b117-transducer-bronze-0-depth-temperature","title":"Airmar B117 Transducer Bronze 0° Depth Temperature","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eBuilt for anglers running center consoles and trailered boats 25 feet and up who need reliable depth and water temperature data without the complexity of full sonar imaging. This is your transducer if you want to know what's under the boat — bottom composition, structure, and temps — on a straightforward single display.\u003c\/p\u003e\n\u003cp\u003eThe B117 is a low-profile in-hull transducer that does one job well: delivers accurate depth and temperature to compatible Airmar displays. The nearly-flush 0° mounting angle minimizes drag while the dual-frequency 50\/200 kHz design gives you options depending on water depth and bottom type. You get clean numbers on the screen without overcomplicating your electronics package.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-Frequency 50\/200 kHz\u003c\/strong\u003e — switches between frequencies so you can read shallow structure and bottom detail at 200 kHz, then punch deeper to 1,200 feet on the 50 kHz band when you're working offshore or deep holes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Profile Housing\u003c\/strong\u003e — extends only 5 mm (3\/16\") outside the hull, cutting drag and protecting the transducer from impact in tight quarters or rough water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBronze Housing\u003c\/strong\u003e — corrosion-resistant construction built to handle saltwater and brackish environments where aluminum would fail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Meter Cable\u003c\/strong\u003e — 33 feet of reach lets you run the transducer from the gunwale or transom to displays mounted inside the console without adding extra conduit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e600 W RMS Power\u003c\/strong\u003e — enough signal strength to cut through thermoclines, suspended sediment, and noise so you get clean bottom readings even in tough water.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs \u0026amp; What's Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Designed specifically for Airmar CP370 and DSM300 displays with Ray connector architecture. Not sure if this works with your setup? Call or text us at (833) 831-4077 — we'll tell you straight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specs:\u003c\/strong\u003e Maximum depth range reaches 800–1,200 feet on 50 kHz and 400–700 feet on 200 kHz. Cone angles are 45° at 50 kHz for wider coverage in deep water, and 12° at 200 kHz for tight, detailed readings. Usable shaft length is 66.5 mm (2.62\"), with a 66.5 mm replacement nut (405) available separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIdeal For:\u003c\/strong\u003e Center-console and trailered boats 25 feet and larger. Mounted in-hull at 0° for minimal drag.\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":45764296966201,"sku":"85726","price":319.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2685\/5225\/files\/85726XL.jpg?v=1777401229"},{"product_id":"airmar-b117-transducer-bronze-thru-hull-low-profile-50200-khz","title":"Airmar B117 Transducer Bronze Thru-Hull Low Profile 50\/200 kHz","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eBuilt for anglers running 25-foot boats and larger who need a reliable, low-profile transducer that won't create drag or catch your foot on deck. Whether you're fishing shallow bays at 200 kHz or tracking bottom structure in 200 feet of water at 50 kHz, the B117 gives you the dual-frequency performance that serious sonar fishing demands without the hassle of a high-profile installation.\u003c\/p\u003e\n\u003cp\u003eThe B117 is the industry standard for anglers who refuse to compromise between clean deck design and sonar quality. Its nearly-flush 5mm profile minimizes hydrodynamic drag while the bronze housing delivers years of corrosion-free performance. Pair it with your Humminbird unit, and you get real-time depth, temperature, and target detail in a package that works on boats with deadrise up to 8 degrees.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-frequency 50\/200 kHz\u003c\/strong\u003e — low frequency penetrates deep water and marks bottom structure clearly; high frequency reveals baitfish, suspended targets, and shallow-water detail with precision.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-profile bronze housing\u003c\/strong\u003e — only 5mm extends beyond your hull, eliminating drag and keeping your deck clean so nothing snags if you step on it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle ceramic element design\u003c\/strong\u003e — proven sonar performance in a compact footprint that installs in a standard 2-inch hole.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRight-angle cable exit\u003c\/strong\u003e — cable runs flat along your hull or inside your cabin, protecting the connection from stress and keeping headroom clear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded rubber washer\u003c\/strong\u003e — lets you tighten the hull nut securely even on irregular or cambered hull surfaces without over-torquing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional temperature sensor\u003c\/strong\u003e — add water temperature to your sonar display to track seasonal patterns and fish behavior.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs \u0026amp; What's Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e This transducer ships with a Humminbird #9 plug and 7-pin connector, ready to connect directly to compatible Humminbird fish finders. Not sure if this works with your setup? Call or text us at (833) 831-4077 — we'll tell you straight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat You Get:\u003c\/strong\u003e B117 bronze thru-hull transducer with Humminbird #9 plug, mounting hardware, and rubber washer. Your Humminbird unit is sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePhysical Specs:\u003c\/strong\u003e 2-inch hole diameter, fits hulls with up to 8 degrees deadrise, urethane acoustic window. Bronze housing meets ABYC H-27 standards for marine electrical safety.\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":45764297097273,"sku":"65259","price":319.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2685\/5225\/files\/65259XL.jpg?v=1777401231"},{"product_id":"airmar-b150-transducer-medium-chirp-12-tilt","title":"Airmar B150 Transducer Medium CHIRP 12° Tilt","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWho This Is For:\u003c\/strong\u003e Freshwater and inland anglers fishing shallow to medium depths who want clean target separation without overpaying for features you don't need. The B150 makes sense if you're running a Garmin XS chartplotter and want a dedicated CHIRP transducer that keeps your sonar sharp on lakes, rivers, and reservoirs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Summary:\u003c\/strong\u003e The B150 is a medium-frequency CHIRP transducer built for anglers who fish in clear water where definition matters. It sweeps 95–155 kHz and delivers a wider beam pattern than high-frequency options, giving you a larger viewing area with cleaner fish targets. This is what happens when you stop chasing depth ratings you'll never use and focus on what actually works: precise imaging in the water column where fish live.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedium-Frequency CHIRP (95–155 kHz)\u003c\/strong\u003e — sweeps a 60 kHz bandwidth from one transducer to deliver multiple frequencies simultaneously — you see better target separation and clearer individual fish marks instead of a crowded sonar screen.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExpanded Viewing Area\u003c\/strong\u003e — 26° to 17° beamwidth on the medium frequency — wider cone means you cover more bottom and suspended structure on each pass, especially useful when you're working new water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth Capability to 2,500 Feet\u003c\/strong\u003e — rated for shallow water and medium depths depending on bottom composition and water conditions — realistic depth range for inland and freshwater applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast-Response Water Temperature\u003c\/strong\u003e — integrated sensor reads temperature in real time — dial in your presentations based on actual conditions instead of guessing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBronze B619 Housing\u003c\/strong\u003e — corrosion-resistant construction built to last in freshwater environments — one less thing to worry about when you're running hard.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs \u0026amp; What's Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e This transducer is designed for Garmin XS Series chartplotters with 8-pin connectivity. The B150 mounts through fiberglass or wood hulls with deadrise angles of 0–7°, so verify your hull type and transom angle before ordering. Not sure if this works with your setup? Call or text us at (833) 831-4077 — we'll tell you straight.\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":45764297162809,"sku":"103954","price":459.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2685\/5225\/files\/103954XL.jpg?v=1777401233"},{"product_id":"airmar-b150m-transducer-chirp-medium-frequency-0","title":"Airmar B150M Transducer CHIRP Medium Frequency 0°","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWho This Is For:\u003c\/strong\u003e Freshwater and inland anglers targeting bass, walleye, and panfish in shallow to medium depths. Built for fiberglass and wood hull boats where you need clear, high-resolution sonar without overspending on a full dual-frequency system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Summary:\u003c\/strong\u003e The B150M is a medium-frequency CHIRP transducer that covers 95–155 kHz in a single housing. It delivers fast water temperature reads and depth soundings up to 2,500 feet, with a narrow to medium beamwidth (26° to 17°) that expands your viewing area and produces larger, clearer fish targets on your echo sounder. For anglers who fish inland waters and want reliable sonar performance at a straightforward price point, this is a solid choice.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedium-Frequency CHIRP (95–155 kHz)\u003c\/strong\u003e — sweeps across a 60 kHz bandwidth to paint a wider, clearer picture of structure and fish — you'll see suspended targets and bottom composition with exceptional clarity in shallow and medium depths.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e26° to 17° Beamwidth\u003c\/strong\u003e — cone narrows as frequency increases, expanding your coverage area and producing larger, more defined fish arcs — critical for distinguishing actual fish from clutter on screen.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltra-Clear Target Resolution\u003c\/strong\u003e — the sweet spot frequency range is optimized for inland and freshwater use — fish and structure stand out without the noise you'd get from dual-frequency trade-offs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth and Fast-Response Temperature\u003c\/strong\u003e — reads bottom in real-time and updates water temperature quickly so you can adjust your approach on the fly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBronze B619 Housing\u003c\/strong\u003e — thru-hull construction rated for 0–7° deadrise, meaning it fits most recreational fiberglass and wood hull boats with minimal fuss.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs \u0026amp; What's Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e This transducer is an 8-pin thru-hull model compatible with Garmin XS Series echo sounders. It requires a 300W power source from your chartplotter or fish finder. If you're not certain your unit supports 8-pin connectivity or 300W output, call or text us at (833) 831-4077 — we'll confirm fit before you buy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e Transducer only. You will need a compatible Garmin XS Series echo sounder and appropriate thru-hull mounting hardware (not included) for installation.\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":45764297261113,"sku":"109065","price":459.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2685\/5225\/files\/109065XL.jpg?v=1777401235"},{"product_id":"airmar-b150m-transducer-chirp-medium-frequency-300w","title":"Airmar B150M Transducer CHIRP Medium Frequency 300W","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWho This Is For:\u003c\/strong\u003e Freshwater and inland anglers fishing shallow to medium depths who want CHIRP sonar without overspending. If you're targeting bass, walleye, or panfish in lakes under 2,500 feet and fish in clear water where target separation matters, this is your transducer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Summary:\u003c\/strong\u003e The B150M is a medium-frequency CHIRP transducer that gives you 60 kHz of total bandwidth in a single unit—that means you're sweeping from 95 to 155 kHz and covering the popular 107 kHz fishing frequency plus everything in between. On your sounder, you'll see larger, clearer fish targets and structure definition that makes the difference between marking a spot and actually understanding what's down there.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCHIRP Medium Frequency (95-155 kHz)\u003c\/strong\u003e — sweeps across a 60 kHz bandwidth to deliver precise target separation and expanded viewing area — you get larger, clearer images of fish and structure on your display with a single transducer instead of juggling dual frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e26° to 17° Beamwidth\u003c\/strong\u003e — the medium-frequency sweep pattern expands your viewing cone as you fish shallower water — this means better coverage and fewer dead spots when you're working shallow flats or transition zones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast-Response Water Temperature\u003c\/strong\u003e — integrated temperature sensor delivers real-time readings — critical for understanding seasonal fish behavior and confirming thermocline location without running a separate probe.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBronze Housing (B619)\u003c\/strong\u003e — corrosion-resistant construction built for freshwater and inland use — ensures reliable performance season after season without premature degradation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow to Medium Depth Range\u003c\/strong\u003e — rated for depths up to 2,500 feet — realistic performance in the 0-1,000-foot range where most recreational freshwater fishing happens, with strong signal quality in typical lake conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs \u0026amp; What's Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Fits Garmin Xs series fish finders with 8-pin transducer connectors. Designed for fiberglass or wood hulls with 0-7° deadrise\/transom angle. Not sure if this works with your setup? Call or text us at (833) 831-4077 — we'll tell you straight.\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":45764297293881,"sku":"109063","price":459.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2685\/5225\/files\/109063XL.jpg?v=1777401236"},{"product_id":"airmar-b164-bronze-thru-hull-transducer-1kw-20","title":"Airmar B164 Bronze Thru-Hull Transducer 1kW 20°","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eBuilt for tournament and serious recreational anglers running center-console and trailered boats in the 25' to 35' range who need maximum sonar power without sacrificing speed or trailer handling. If you're running a fast boat and can't fit a high-performance fairing, this is your transducer.\u003c\/p\u003e\n\u003cp\u003eThe B164 delivers 1kW of power with a tilted-element ceramic array that keeps your beam vertical and concentrated directly below your boat — no fairing needed, no protrusion beyond 6.35mm, no performance hit. You get the power of a large transducer in a flush-mount package that won't hang up on trailer rollers or slow you down. This is Airmar's answer for anglers who refuse to compromise on sonar quality because of hull design or boat type.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1kW Power Output\u003c\/strong\u003e — full 1 kilowatt of acoustic energy across dual 50kHz and 200kHz frequencies — gives you the range and definition serious structure fishing demands, especially in deep water or challenging bottom conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTilted Element Technology\u003c\/strong\u003e — ceramic arrays are angled inside the housing to produce a perfectly vertical beam with maximum energy concentrated directly below — you see what's under you with clarity, not wasted side echoes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlush-Mount Bronze Housing\u003c\/strong\u003e — protrudes less than 0.25 inches below your hull, so it sits flat on trailer bunks and rollers with zero risk of damage — your boat performs like it did before the transducer went in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50\/200kHz Dual Frequency\u003c\/strong\u003e — switches between 50kHz for deep structure and long-range detection, and 200kHz for shallow water and target separation — covers every depth scenario without swapping transducers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Water Temperature Sensor\u003c\/strong\u003e — tracks surface temperature in real time with fast response — one less through-hull hole to drill, one less thing to fail.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs \u0026amp; What's Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Works with any 600W or 1kW Humminbird echosounder. The transducer ships with a Humminbird #9 7-pin connector already installed — plug it straight into your head unit. Rated for hulls up to 28° deadrise. Not sure if this works with your setup? Call or text us at (833) 831-4077 — we'll tell you straight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e B164 Bronze Thru-Hull Transducer with Humminbird #9 Plug pre-installed. Installation hardware and through-hull fitting sold separately — coordinate with your installer or dealer before ordering.\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":45764297359417,"sku":"65255","price":1299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2685\/5225\/files\/65255XL.jpg?v=1777401237"},{"product_id":"airmar-b164-thru-hull-transducer-1-kw-12","title":"Airmar B164 Thru-Hull Transducer 1 kW 12°","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eBuilt for tournament and serious recreational anglers running center-console and trailered boats in the 25' to 35' range who need 1 kW power without the performance penalty of a fairing. You get full sonar capability while maintaining your boat's speed and efficiency—critical when you're running tight schedules or chasing fish across big water.\u003c\/p\u003e\n\u003cp\u003eThis is a thru-hull transducer that delivers tournament-grade power in a package that sits flush with your hull. The Tilted Element ceramic arrays are angled inside the housing to give you a clean vertical beam with maximum acoustic energy pointed straight down—what matters when you're reading hard bottom, structure, and suspended fish. At 1 kW, it's engineered to work with any 600W or 1 kW fishfinder without the hull modification headaches.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 kW Power, 50\/200 kHz Dual Frequency\u003c\/strong\u003e — delivers the signal strength of high-end systems without requiring a high-performance fairing — you'll see deeper, clearer returns on both structure and fish, especially in rough water or heavy chop.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTilted Element Ceramic Arrays\u003c\/strong\u003e — the ceramics sit at an angle inside the bronze housing to produce a tight, focused vertical beam — this design cuts through water column clutter and puts energy exactly where you need it: directly below your boat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltra-Low Profile (less than 0.25\" protrusion)\u003c\/strong\u003e — sits flush with your hull and clears trailer rollers and bunks without damage — no performance drag, no installation complications, boat runs as fast and clean as it did before the transducer went in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBronze Housing\u003c\/strong\u003e — corrosion-resistant material built to handle saltwater, brackish, and freshwater environments without degradation over years of hard use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Water-Temperature Sensor\u003c\/strong\u003e — reads depth and real-time water temp without requiring a separate sensor — one less piece of gear to manage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs \u0026amp; What's Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Works with any 600W or 1 kW Humminbird echosounder via the 14-pin connector. Suitable for hulls with up to 28° deadrise. Designed for boats 25' to 35' in length. Not sure if this works with your fishfinder? Call or text us at (833) 831-4077 — we'll tell you straight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn the Box:\u003c\/strong\u003e Airmar B164 Bronze Thru-Hull Transducer with Humminbird 14-pin connector. Cable and installation hardware sold separately; order per your boat's specific thru-hull requirements.\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":45764297457721,"sku":"65257","price":1299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2685\/5225\/files\/65257XL.jpg?v=1777401239"},{"product_id":"airmar-b164-thru-hull-transducer-1kw-20","title":"Airmar B164 Thru-Hull Transducer 1kW 20°","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWho This Is For:\u003c\/strong\u003e Tournament and serious recreational anglers running center-console or trailered boats in the 25' to 35' range who need 1kW power and high-frequency imaging without adding hull drag or affecting boat performance. If you're running a fast boat that gets trailered and can't accommodate a fairing, this is your transducer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Summary:\u003c\/strong\u003e The Airmar B164 is a 1kW thru-hull transducer engineered to deliver maximum sonar power in a low-profile package. It uses tilted ceramic elements inside a bronze housing to aim energy straight down—no fairing needed—and sits flush enough to clear trailer bunks without damage. You get the output of a high-powered system with none of the installation compromises or performance drag.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 kW power at 50\/200 kHz dual frequency\u003c\/strong\u003e — significantly more sonar output than standard 600W transducers, meaning clearer target separation and better detection of suspended fish and hard structure at depth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTilted Element technology\u003c\/strong\u003e — ceramic arrays are angled inside the housing to produce a perfect vertical beam directly below your boat without needing a fairing, so you can maintain top speed and fuel efficiency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlush-mount bronze housing with under 0.25\" protrusion\u003c\/strong\u003e — sits low enough to rest on trailer rollers and bunks with zero damage, critical for boats that spend time on the road between tournaments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with any 600W or 1 kW echosounder\u003c\/strong\u003e — works with Humminbird 14-pin systems and integrates seamlessly into existing setups without replacing your control head.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in depth and water-temperature sensor\u003c\/strong\u003e — one transducer handles sonar imaging and real-time temperature data for seasonal pattern decisions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs \u0026amp; What's Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e The B164 connects via Humminbird 14-pin plug and works with any 600W or 1 kW echosounder. It's engineered for boats with hull deadrise up to 28° and sized for vessels 25' to 35' in length. Not sure if this works with your setup? Call or text us at (833) 831-4077 — we'll tell you straight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e Weight: 6 lbs | Acoustic window: Urethane | Dual frequency: 50\/200 kHz | Power: 1 kW | Hull deadrise rating: up to 28°.\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":45764297588793,"sku":"65258","price":1299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2685\/5225\/files\/65258XL.jpg?v=1777401241"},{"product_id":"airmar-b164-transducer-1-kw-50200-khz-12-tilted-bronze","title":"Airmar B164 Transducer 1 kW 50\/200 kHz 12° Tilted Bronze","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eBuilt for serious anglers running center-console and trailered boats up to 36 feet who need full 1 kW power without sacrificing trailer clearance. If you're tired of choosing between power and practicality, this transducer solves that problem.\u003c\/p\u003e\n\u003cp\u003eThe B164 is a flush-mount thru-hull transducer that delivers full 1 kW of sonar power in a housing that sits nearly flush with your hull—it won't interfere with trailer bunks or rollers. You get dual-frequency capability (50\/200 kHz), reliable depth and temperature sensing, and the engineering to match any 600W or 1 kW echo sounder on the market. On the water, that means crisp bottom definition, accurate structure identification, and water temps you can trust.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 kW Power Output\u003c\/strong\u003e — full sonar power without needing a fairing or high-profile housing — critical for seeing hard structure and suspended fish on fast-moving boats.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-Frequency Elements (50\/200 kHz)\u003c\/strong\u003e — 50 kHz wide beam (22°) for depth to 1800 feet; 200 kHz narrow beam (6°) for detailed bottom composition and fish marks — you choose the frequency that fits your water and fishing depth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTilted Element Design\u003c\/strong\u003e — ceramic arrays are angled inside the housing to deliver a perfectly vertical beam below your boat, maximizing signal strength and eliminating dead zones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltra-Low Profile Bronze Housing\u003c\/strong\u003e — extends less than 1\/4 inch below the hull, sits flat on trailer bunks and rollers with zero interference — no more drilling new holes or modifying your rig.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast-Response Temperature Sensing\u003c\/strong\u003e — real-time water temperature at the transducer face, not a delayed average — helps you find the thermocline and locate active fish in seasonal transitions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth Performance to 1800 Feet (50 kHz)\u003c\/strong\u003e — reaches deep structure and channels in salt and freshwater — you're never limited by the transducer's range on most fishing grounds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs \u0026amp; What's Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e This transducer interfaces with any 600W or 1 kW echo sounder using Airmar's 9-pin MM1 connector. It uses a Mix \u0026amp; Match cable system, meaning you'll need to verify your echo sounder's connector type and cable length before ordering. If you're unsure whether this works with your specific unit, call or text us at (833) 831-4077—we'll confirm compatibility straight up.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn the Box:\u003c\/strong\u003e B164 bronze thru-hull transducer with integrated Xducer ID technology and 2-meter (6.5-foot) cable. Cable connector type and display-side connector are determined by your echo sounder—confirm before purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMount Location:\u003c\/strong\u003e Designed for hulls with 8° to 15° deadrise angles (typical for center-console and trailered boats). Requires a 95 mm (3-3\/4 inch) hole with 71 mm (2.80 inch) usable shaft length.\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":45764297883705,"sku":"113442","price":1299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2685\/5225\/files\/113442XL.jpg?v=1777401243"},{"product_id":"airmar-b164-transducer-1-kw-50200-khz-20-tilted","title":"Airmar B164 Transducer 1 kW 50\/200 kHz 20° Tilted","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eBuilt for serious anglers running center-console and trailered boats up to 36 feet who need 1 kW sonar power without sacrificing the ability to haul out of the water. If your boat sits on trailer bunks or rollers, this is the transducer you've been looking for—full power with zero extra draft.\u003c\/p\u003e\n\u003cp\u003eThe B164 gives you dual-frequency sonar (50\/200 kHz) in a low-profile bronze housing that barely breaks the plane of your hull. The tilted ceramic elements keep your sonar cone perfectly vertical regardless of your hull's deadrise angle, so you're reading bottom and structure accurately from the moment you leave the ramp.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 kW Power\u003c\/strong\u003e — full sonar energy without a high-performance fairing, meaning cleaner bottom definition and better target separation, especially on the low frequency where it counts for deep structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Frequency (50\/200 kHz)\u003c\/strong\u003e — 50 kHz delivers depth to 1,800 feet with a wide 22° beamwidth for locating breaklines and suspended fish; 200 kHz tightens to a 6° cone for crisp structure detail and baitfish ID in shallower zones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTilted Element Design\u003c\/strong\u003e — the ceramic arrays angle inside the housing so your sonar cone stays true vertical even on boats with 16° to 24° of hull deadrise, eliminating the dead zones and tilted readings you get with non-tilted units.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrailer-Friendly Housing\u003c\/strong\u003e — extends less than a quarter-inch below the hull, so bunks and rollers won't drag on it; no performance penalty on plane or fuel economy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast Temperature Sensing\u003c\/strong\u003e — tracks water temperature in real time to help you dial in seasonal patterns and confirm thermocline shifts mid-day.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs \u0026amp; What's Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Works with any 600 W or 1 kW Airmar echo sounder or fish finder running the 9-pin connector standard (MM1). This is a Mix \u0026amp; Match Series transducer, which means you'll need to verify your sounder's connector type before purchase. Not sure if this works with your setup? Call or text us at (833) 831-4077 — we'll tell you straight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e B164 transducer with 2-meter (6.5-foot) cable. Cable connection to your sounder is required; the transducer does not include a display connector—you'll integrate it into your existing Airmar-compatible unit or purchase one separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Specs:\u003c\/strong\u003e Bronze housing; 95 mm (3¾\") mounting hole; 71 mm (2.80\") usable shaft length; 2.7 kg (6 lbs); designed for fiberglass and wood hulls with 16° to 24° deadrise; maximum depth capability 1,800 feet (50 kHz) and 800 feet (200 kHz).\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":45764298440761,"sku":"113443","price":1299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2685\/5225\/files\/113443XL.jpg?v=1777401245"},{"product_id":"airmar-b164-transducer-1-kw-bronze-flush-mount-12","title":"Airmar B164 Transducer 1 kW Bronze Flush-Mount 12°","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWho This Is For:\u003c\/strong\u003e Tournament and serious recreational anglers running center-console or trailered boats in the 25–35-foot range who need full 1 kW power without sacrificing performance or convenience. This transducer is engineered specifically for boats that can't accommodate a high-performance fairing and need maximum sonar sensitivity without compromise.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Summary:\u003c\/strong\u003e The B164 is a 1 kW thru-hull transducer that delivers full power output with a flush-mounted bronze housing that protrudes less than a quarter-inch below your hull. You get the energy and frequency options of a 1 kW system—50\/200 kHz dual ceramics—while keeping your boat's running performance and trailering capability completely intact. No fairing needed, no damage from trailer bunks or rollers, no compromise on what your fishfinder can see.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 kW Power Output — 50\/200 kHz Dual Ceramics\u003c\/strong\u003e — Delivers full sonar energy across two critical frequencies — you get the broad coverage of 50 kHz for deep water and structure, plus the detail of 200 kHz for shallow targets and suspended fish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTilted Element Technology\u003c\/strong\u003e — Angles the ceramic arrays inside the housing to create a tight vertical beam aimed directly below your boat — maximizes energy on what matters while reducing side-lobe clutter and false readings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlush-Mount, Low-Profile Bronze Housing\u003c\/strong\u003e — Protrudes less than 0.25 inches below the hull, so it sits safely on trailer rollers and bunks with zero damage risk — you can launch and load without second-guessing yourself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Water Temperature Sensor\u003c\/strong\u003e — Gives you real-time surface temperature alongside depth data — critical for seasonal patterns, thermocline location, and understanding where active fish are holding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo Hull Performance Impact\u003c\/strong\u003e — The compact design and minimal protrusion mean no added drag, no speed loss, and no fuel penalty — your boat runs like it did before the install.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs \u0026amp; What's Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Works with any 600W or 1 kW echosounder. Comes pre-fitted with a Humminbird #9 seven-pin connector, so it integrates directly with compatible Humminbird units. Hull deadrise tolerance up to 28 degrees. Not sure if this works with your setup? Call or text us at (833) 831-4077 — we'll tell you straight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecs:\u003c\/strong\u003e Weight: 2.7 kg (6 lbs). Hull deadrise: up to 28°. Acoustic window: urethane. Designed for boats 25–35 feet.\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":45764298571833,"sku":"65254","price":1299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2685\/5225\/files\/65254XL.jpg?v=1777401247"},{"product_id":"airmar-b164-transducer-1-kw-bronze-thru-hull-50200-khz","title":"Airmar B164 Transducer 1 kW Bronze Thru-Hull 50\/200 kHz","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eBuilt for center-console and trailered boats where hull space is tight and you need serious sonar power without a fairing. If you run a fast boat that sits on bunks, tow it regularly, or fish in depths beyond 200 feet, this is the transducer that gives you 1 kW performance in a low-profile package.\u003c\/p\u003e\n\u003cp\u003eThe B164 is a dual-frequency thru-hull transducer that delivers full 1 kW power from a bronze housing that barely protrudes below your hull—less than a quarter inch. You get 50 kHz for deep-water distance and 200 kHz for target separation and detail. It mounts flush, it won't slow you down, and it connects to any 600W or 1 kW echo sounder on the market.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-frequency sonar (50\/200 kHz)\u003c\/strong\u003e — covers shallow structure with precision and reaches deep water with wide coverage — you'll mark fish at any depth from 0 to 1,800 feet without changing transducers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 kW power without a fairing\u003c\/strong\u003e — full professional-grade punch in a compact design — your sounder will display crisp detail and fast response even in rough water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-profile bronze housing (less than 6.35 mm below hull)\u003c\/strong\u003e — sits on trailer rollers and bunks without interference — your boat runs at full speed and handles the same whether you're trailering or floating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTilted Element design\u003c\/strong\u003e — ceramic arrays are angled internally to produce a perfectly vertical beam directly below your boat — maximum energy where you need it, regardless of your hull's deadrise angle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast water temperature sensing\u003c\/strong\u003e — gives you real-time thermocline data to dial in seasonal patterns — essential for targeting cold-water fish in summer or warm-water refuges in winter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated for hulls with 0° to 7° deadrise\u003c\/strong\u003e — engineered specifically for center-console and moderate-V hulls — confirms compatibility before you drill.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs \u0026amp; What's Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Works with any 600W or 1 kW Airmar-compatible echo sounder. Connects via Airmar 9-Pin (MM1) connector. The transducer is part of the Mix \u0026amp; Match Series—you'll need to source your own cable to connect to your sounder. Not sure if this works with your setup? Call or text us at (833) 831-4077—we'll tell you straight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn the Box:\u003c\/strong\u003e B164 Bronze Thru-Hull Transducer with 2M (6.5') cable. Cable connector is sold separately—confirm compatibility with your echo sounder before purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePhysical Specs:\u003c\/strong\u003e Hole size 95 mm (3-3\/4\"), usable shaft length 71 mm (2.80\"), maximum vessel length up to 11 m (36'), weight 2.7 kg (6 lbs). Maximum depth: 549 m (1,800') on 50 kHz, 244 m (800') on 200 kHz.\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":45764298735673,"sku":"113441","price":1299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2685\/5225\/files\/113441XL.jpg?v=1777401249"},{"product_id":"airmar-b164-transducer-1kw-0-thru-hull","title":"Airmar B164 Transducer 1kW 0° Thru Hull","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eBuilt for tournament and sport-fishing anglers running fast, trailered boats where hull fairings aren't an option. If you're running hard between spots and need clean sonar data on a tight installation envelope, the B164 delivers without the complications of external housings or custom fairing work.\u003c\/p\u003e\n\u003cp\u003eThe B164 is a 1kW bronze thru-hull transducer engineered for speed and reliability. It pairs dual-frequency capability with a fast-response temperature sensor, giving you both broad coverage and precision depth on the same head. At 1000W of power, you'll get strong returns even in thick cover and rough conditions — and the low-profile design means no drag penalty on your hull.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1000W Power Output\u003c\/strong\u003e — delivers strong sonar returns in dense cover, murky water, and rough conditions — you'll see fish and structure other anglers miss.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-Frequency (50kHz \/ 200kHz)\u003c\/strong\u003e — 50kHz gives you wide coverage and deep reach for structure and suspended fish; 200kHz gives you precise bottom definition and target separation in shallow water — switch between them on the water based on what you're fishing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast-Response Temperature Sensor\u003c\/strong\u003e — tracks thermocline shifts and water temperature changes in real time — critical for offshore fishing and seasonal pattern changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Profile Bronze Housing\u003c\/strong\u003e — installs flush with your hull on boats with 0-7 degree deadrise — no external fairing required, which means zero performance penalty and less maintenance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0° Tilt Angle\u003c\/strong\u003e — engineered specifically for boats with minimal hull deadrise — you get optimal beam angle without compromise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.875\" Installation Hole\u003c\/strong\u003e — fits standard thru-hull mounts on tournament and production boats — straightforward installation with no fabrication.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs \u0026amp; What's Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e This model features the blue connector (BL) and is compatible with Lowrance HDS series fish finders, Simrad NSE series chartplotters, and many current and legacy Lowrance units. Not sure if this works with your setup? Call or text us at (833) 831-4077 — we'll tell you straight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerformance:\u003c\/strong\u003e Maximum depth capability is 1200-1800 ft at 50kHz and 500-800 ft at 200kHz. Beam angles are 22 x 20° at 50kHz and 6 x 6° at 200kHz.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e 3.875\" hole diameter (98mm). Zero degree tilt angle for hull deadrise of 0-7 degrees.\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":45764299030585,"sku":"59852","price":1299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2685\/5225\/files\/59852XL.jpg?v=1777401252"},{"product_id":"airmar-b164-transducer-1kw-20-thru-hull","title":"Airmar B164 Transducer 1kW 20° Thru-Hull","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eBuilt for tournament anglers and serious recreational fishermen running center-console and trailered boats from 25' to 35'. You need 1kW power without dragging a high-performance fairing through the water — this transducer fits that exact need.\u003c\/p\u003e\n\u003cp\u003eThe B164 gives you the punch of 1,000 watts of sonar power in a flush-mount bronze housing that protrudes less than a quarter-inch below your hull. The tilted ceramic elements inside send maximum energy straight down to what matters: the fish beneath your boat. You get crystal-clear structure definition and fish separation at speed, with zero performance penalty on the water.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1kW Power Output\u003c\/strong\u003e — pushes 1,000 watts RMS to the water — delivers faster target acquisition and cleaner bottom definition than 600W units, especially in deep water or poor conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Frequency (50\/200 kHz)\u003c\/strong\u003e — switches between a wide 22° x 20° cone at 50 kHz for structure work and a tight 6° x 6° cone at 200 kHz for high-definition detail — you can read bottom composition and find suspended fish in the same pass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTilted Element Design\u003c\/strong\u003e — ceramic arrays angle inside the housing to focus maximum energy directly below your boat — eliminates dead zones off to the sides and gives you the hardest-hitting vertical beam without a fairing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimal Hull Protrusion\u003c\/strong\u003e — less than 0.25\" below your hull — sits safely on trailer rollers and bunks with zero risk of damage, and won't slow you down or create drag at cruise speed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth Range to 1,800' (50 kHz) and 800' (200 kHz)\u003c\/strong\u003e — covers everything from skinny tournament flats to offshore structure, with enough power to punch through to the bottom in deep, difficult water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Temperature Sensor\u003c\/strong\u003e — fast-response water temp readout helps you locate thermoclines and seasonal patterns without adding extra hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs \u0026amp; What's Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Works with any 600W or 1kW echosounder unit. Fixed 20° tilt angle is engineered for hulls with 16° to 24° deadrise — a tight range that covers most center-console and offshore sportfish boats. Not sure if this works with your setup? Call or text us at (833) 831-4077 — we'll tell you straight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn the Box:\u003c\/strong\u003e B164 transducer with blue connector, 10-meter cable, mounting hardware. Your echosounder\/fish finder control head is sold separately.\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":45764299128889,"sku":"61942","price":1299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2685\/5225\/files\/61942XL.jpg?v=1777401254"},{"product_id":"airmar-b164-transducer-1kw-20-tilted-element","title":"Airmar B164 Transducer 1kW 20° Tilted Element","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWho This Is For:\u003c\/strong\u003e Serious anglers running center-console or trailered boats up to 36 feet who need 1 kW sonar power without sacrificing the ability to load on a trailer. If you're running moderate deadrise (16–24°), fish deep water, and want maximum sensitivity without a fairing that hangs below your hull, this transducer is built for you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Summary:\u003c\/strong\u003e The B164 is a flush-mount, dual-frequency transducer that delivers full 1 kW power in a housing that extends less than a quarter-inch below your hull. The tilted ceramic element inside is angled to match your boat's deadrise, sending a clean vertical beam straight down—no matter your angle. You get 50 kHz for deep structure and 200 kHz for detail, all in one compact bronze housing that won't catch on trailer bunks or slow you down.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 kW Power Output\u003c\/strong\u003e — full power without requiring a high-performance fairing — you get the sensitivity of a big transducer in a small package that clears your trailer completely.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTilted Element Design\u003c\/strong\u003e — ceramic arrays angled inside the housing to compensate for your boat's deadrise — delivers a clean vertical beam at any angle, not a tilted one that wastes energy off to the sides.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-Frequency (50\/200 kHz)\u003c\/strong\u003e — 50 kHz with 22° beamwidth reaches 1,800 feet for open water; 200 kHz with 6° beamwidth gives you tight detail on structure down to 800 feet — switch between them based on depth and bottom type.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltra-Low Profile Housing\u003c\/strong\u003e — extends only 6.35 mm (0.25 inch) below the hull, so it sits safely on trailer rollers and bunks without modification — no hauling damage, no performance hit underway.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Sensing\u003c\/strong\u003e — built-in sensor gives you real-time water temp at the transducer face — critical for seasonal bite windows and thermocline location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixed 20° Tilt\u003c\/strong\u003e — engineered for 16–24° deadrise angles common in center-console and fishing boats — if your hull falls in that range, this is optimized for you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs \u0026amp; What's Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e The B164 is an 8-pin Garmin transducer that interfaces with any 600 W or 1 kW Garmin echo sounder. Works with Garmin fishfinders and chartplotters in their 600\/1000 W power class. Not sure if this works with your specific unit? Call or text us at (833) 831-4077 — we'll tell you straight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specs:\u003c\/strong\u003e Bronze housing (stainless steel version SS164 also available). Depth range: 1,640 feet max. Hull compatibility: fiberglass or wood. Max vessel length: 36 feet. Hole size: 95 mm (3-3\/4 inch). Usable shaft length: 71 mm (2.80 inches). Weight: 2.7 kg (6 lbs).\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":45764299161657,"sku":"109041","price":1299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2685\/5225\/files\/109041XL.jpg?v=1777401255"},{"product_id":"airmar-b164-transducer-1kw-bronze-thru-hull-0","title":"Airmar B164 Transducer 1kW Bronze Thru-Hull 0°","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWho This Is For:\u003c\/strong\u003e Tournament and serious recreational anglers running center-console or trailered boats in the 25–35-foot range who need professional-grade 1kW sonar performance without sacrificing speed or handling. If you're launching and pulling your boat regularly, or running tight to the rail in competition, this transducer won't slow you down or damage on the trailer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Summary:\u003c\/strong\u003e The Airmar B164 is a 1kW thru-hull transducer built on Tilted Element technology—ceramic arrays angled inside the housing to deliver a perfectly vertical beam with maximum energy straight down. It mounts flush to your hull (less than a quarter-inch protrusion), meaning no fairing required, no performance hit, and no damage from trailer bunks. Your fishfinder sees everything directly beneath you with the power of a tournament-grade system.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1kW power at 50\/200 kHz\u003c\/strong\u003e — dual-frequency sonar with serious juice behind it — gives you crisp returns on structure, baitfish, and suspended targets even in deep, rough, or debris-laden water where lower-power units fall flat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTilted Element ceramic arrays\u003c\/strong\u003e — angled construction inside the housing creates a tight, vertical beam with maximum acoustic energy pointing straight down — you get better target separation and won't waste power on dead zones off to the sides.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlush-mount bronze housing, sub-6mm protrusion\u003c\/strong\u003e — sits nearly flush with your hull, won't interfere with trailer rollers or bunks, and has zero impact on boat handling or speed — critical if you're trailering regularly or running tournaments where every knot counts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-temperature sensor with fast response\u003c\/strong\u003e — monitors thermal layers in real time as you move — helps you identify where fish are holding and adjust your presentation on the fly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth sensor\u003c\/strong\u003e — instant, reliable depth readout at any speed — essential for structure fishing and knowing when you're getting into hazardous shallows.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs \u0026amp; What's Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Works with any 600W or 1kW Humminbird echosounder via the 14-pin plug connector. This transducer is designed for hulls with up to 28° deadrise and is sized for boats 8–11 meters (25–35 feet). Not sure if this fits your setup? Call or text us at (833) 831-4077 — we'll tell you straight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn the Box:\u003c\/strong\u003e Airmar B164 thru-hull transducer with 14-pin Humminbird connector and urethane acoustic window. Cable and mounting hardware are included; your Humminbird unit is sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.7 kg (6 lbs).\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":45764299227193,"sku":"65256","price":1299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2685\/5225\/files\/65256XL.jpg?v=1777401257"},{"product_id":"airmar-b164-transducer-bronze-1kw-tilted-element-0","title":"Airmar B164 Transducer Bronze 1kW Tilted Element 0°","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eBuilt for tournament anglers and serious recreational boaters running center consoles and trailered boats in the 25' to 35' range who need 1kW power without sacrificing hull design or trailering convenience. You're chasing speed and distance, and you need sonar that won't slow you down or get damaged on the trailer.\u003c\/p\u003e\n\u003cp\u003eThis is a 1kW thru-hull transducer engineered around Airmar's Tilted Element technology — the ceramic arrays are angled inside the housing to give you a true vertical beam with maximum acoustic energy focused directly below your boat. It sits flush against your hull, protruding less than a quarter inch, so it won't interfere with trailer bunks or affect your boat's running performance. You get the power of a fairing-style transducer without the bulk.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 kW Power at 50\/200 kHz\u003c\/strong\u003e — doubles the sonar output compared to 600W units, giving you longer range, faster target resolution, and the ability to cut through noise and clutter in challenging conditions — critical when you're running tournament speeds and need fish returns in real time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTilted Element Technology\u003c\/strong\u003e — ceramic arrays are angled inside the housing to produce a perfectly vertical beam with all energy focused directly below your boat — you get cleaner bottom definition and better target separation than standard designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlush-Mount Bronze Housing\u003c\/strong\u003e — protrudes less than 0.25\" below the hull, so it clears trailer rollers and bunks during launch and recovery with zero damage risk — built for boats that get trailered hard and fast.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eZero Performance Impact\u003c\/strong\u003e — the low-profile design means no drag penalty and no handling changes, even at full throttle — your boat runs the same whether the transducer is on or off.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth and Water Temperature Sensor\u003c\/strong\u003e — real-time temperature data helps you track seasonal patterns and locate thermocline breaks without a separate sensor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs \u0026amp; What's Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Works with any Humminbird 600W or 1 kW echosounder (fish finder control head) via the included 7-pin Humminbird #9 plug connector. If you're unsure whether your existing Humminbird unit will accept this transducer, call or text us at (833) 831-4077 — we'll confirm the match before you buy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePhysical Specs:\u003c\/strong\u003e Weight 2.7 kg (6 lbs). Rated for hulls with deadrise up to 28°. Urethane acoustic window.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn the Box:\u003c\/strong\u003e Airmar B164 bronze thru-hull transducer with 7-pin Humminbird #9 connector. Cable length and installation hardware details should be confirmed with your installer or Airmar documentation.\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":45764299292729,"sku":"65253","price":1299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2685\/5225\/files\/65253XL.jpg?v=1777401258"},{"product_id":"airmar-b175-medium-ultra-wide-transducer-1kw-12-12-pin","title":"Airmar B175 Medium Ultra-Wide Transducer 1kW 12° 12-Pin","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eBuilt for serious anglers targeting pelagic and mid-water species — stripers, mackerel, tuna, and suspended gamefish in depths beyond 200 feet. If you fish deeper water and need maximum horizontal coverage under your boat without sacrificing mid-depth detail, this is your transducer.\u003c\/p\u003e\n\u003cp\u003eThe B175 Medium Ultra-Wide is a 1 kW thru-hull transducer that delivers exceptional beamwidth (57–73° side-to-side) paired with medium frequency (60–100 kHz) for superior target separation and depth performance down to 1,300 feet. The tilted ceramic element automatically corrects for your hull's deadrise, so you get vertical imaging the moment you drop it in — no guesswork, no dead zones. It's the kind of tool that reveals the difference between a sparse bite and a loaded bite.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltra-Wide Beamwidth (57–73° port\/starboard, 16° fore\/aft)\u003c\/strong\u003e — covers nearly three-quarters of the area directly beneath your boat — you'll spot fish and structure across the full width of your sweep, especially critical for mobile anglers and those running over open water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedium Frequency (60–100 kHz) with 40 kHz Bandwidth\u003c\/strong\u003e — sits between low and high frequency for excellent mid-depth performance and crisp fish-target separation — you see individual baitfish and gamefish distinctly, not as a smear on screen.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 kW Power, 1,300-Foot Depth Rating\u003c\/strong\u003e — delivers strong echo return and depth tracking in deep water and structure-rich environments — critical for pelagic and deep-ledge work where weak signals mean missed fish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTilted Element Housing (20°, 12°, or 0° angle options)\u003c\/strong\u003e — ceramic element auto-corrects for hull deadrise and installs nearly flush to the hull — you get vertical beam orientation without manual adjustment, and low-profile design preserves speed and fuel efficiency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBronze Housing\u003c\/strong\u003e — built for stepped, planing, or displacement hulls — no compatibility surprises; it works on your boat regardless of hull shape.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast-Response Temperature Sensor\u003c\/strong\u003e — tracks water temperature in real time as you move — essential for finding the temperature breaks and seasonal patterns that trigger bites.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCHIRP-Ready Design\u003c\/strong\u003e — compatible with CHIRP sonar networks when paired with a compatible Garmin chartplotter — opens the door to frequency-stacking and advanced sonar imaging as your electronics grow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXducer ID Technology\u003c\/strong\u003e — automatic transducer recognition on compatible systems — saves setup time and eliminates manual configuration errors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs \u0026amp; What's Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e 12-pin connector for Garmin fish finders and chartplotters. Works with Garmin HELIX, ECHOMAP, and compatible Garmin sonar networks. Not sure if this works with your setup? Call or text us at (833) 831-4077 — we'll tell you straight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e B175 Medium Ultra-Wide thru-hull transducer with 12-pin connector and mounting hardware. Transducer only — cable runs and installation hardware for your specific boat may be sold separately.\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":45764299358265,"sku":"107583","price":1999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2685\/5225\/files\/107583XL.jpg?v=1777401260"},{"product_id":"airmar-b175-transducer-low-frequency-chirp-0-tilt","title":"Airmar B175 Transducer Low Frequency CHIRP 0° Tilt","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eBuilt for anglers running boats up to 36 feet who need serious deep water performance without a massive transducer footprint. If you fish deep structure, ledges, or offshore drop-offs and want one transducer that handles it all, this is your setup.\u003c\/p\u003e\n\u003cp\u003eThe B175 is a low-frequency CHIRP transducer that trades mid-range versatility for exceptional depth range and tracking in deep water. You get 20 kHz of total bandwidth, a water temp sensor, and a low-profile bronze housing that installs nearly flush to your hull. This is pure deep water firepower in a compact package.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Frequency 40-60 kHz CHIRP\u003c\/strong\u003e — optimized for depth performance to 2,500 feet — your best choice when your fishing grounds are genuinely deep and you need a clean signal from 300 feet down.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 kW power\u003c\/strong\u003e — enough juice to cut through offshore conditions and return strong echoes from deep structure without overshooting target definition.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-profile thru-hull bronze housing\u003c\/strong\u003e — installs flush to the hull and handles fiberglass, wood, or stepped hulls — minimal drag and clean integration on center consoles and small cruisers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0° tilt element\u003c\/strong\u003e — corrected for 0-7 degree hull deadrise — ensure the beam points straight down regardless of how your hull is built, so depth readings stay accurate even at speed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in water temperature sensor\u003c\/strong\u003e — continuous temp data without running a separate sensor line.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXducer ID technology\u003c\/strong\u003e — automatic recognition by compatible sonar units — no manual configuration needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs \u0026amp; What's Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e This transducer requires a separate mix-and-match cable to connect to your sonar head unit. Your cable type depends on your specific fish finder brand and model — Garmin, Lowrance, Simrad, and Humminbird all use different connectors. Not sure if this works with your setup? Call or text us at (833) 831-4077 — we'll tell you straight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e Weight: 6 lbs | Hull hole size: 3-7\/8\" | Recommended boat size: Up to 36 feet | Beam width: 32° to 21° (depending on frequency selected) | Maximum depth: 2,500 feet\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":45764299587641,"sku":"83333","price":1799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2685\/5225\/files\/83333XL.jpg?v=1777401261"},{"product_id":"airmar-b175h-transducer-bronze-20-thru-hull-chirp","title":"Airmar B175H Transducer Bronze 20° Thru-Hull CHIRP","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eBuilt for serious anglers running center consoles and smaller boats who need pinpoint structure detection without the bulk. If you're fishing tight to reefs, wrecks, and hard bottom—and you want to see individual baitfish and gamefish in a school—this transducer is built for that mission.\u003c\/p\u003e\n\u003cp\u003eThe B175H is a high-frequency CHIRP transducer that mounts flush to your fiberglass or wood hull and delivers exceptional shallow-water detail and fish separation. One installation gives you 80 kHz of total bandwidth across 130–210 kHz, meaning you get multiple sonar frequencies working together in a single transducer. The tilted element design corrects for your hull's deadrise automatically, so your sonar cone stays level and your echoes come back strong—even on a stepped or planing hull.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Frequency CHIRP (130–210 kHz)\u003c\/strong\u003e — transmits multiple frequencies simultaneously in one transducer — you get superior shallow-water performance, tight bottom detail, and the ability to separate individual fish in a school at a glance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNarrow Beamwidth (10° to 6°)\u003c\/strong\u003e — focuses the sonar cone tightly on structure and fish — you'll pinpoint fish holding tight to wrecks and reefs instead of guessing which part of the structure they're using.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e80 kHz of Total Bandwidth\u003c\/strong\u003e — gives you all the frequency flexibility of a dual-frequency unit in a single installation — no second transducer to install or troubleshoot.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTilted Element Design\u003c\/strong\u003e — the ceramic element is fixed at a 20° angle inside the housing to automatically correct for hull deadrise — your sonar cone stays level and efficient, even on stepped or planing hulls up to 24° deadrise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Profile Thru-Hull Housing\u003c\/strong\u003e — mounts almost flush to the hull for clean aesthetics and good sonar display resolution at speed — minimal drag and no bulky transducer extending below your running surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 kW Power with 1,000-Foot Maximum Depth\u003c\/strong\u003e — strong signal penetration for offshore and deep-water work, with responsive performance in shallow water too.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth and Water Temperature Sensing\u003c\/strong\u003e — real-time temperature and depth data help you find the thermocline and thermal break structure where fish suspend.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs \u0026amp; What's Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Designed for Garmin fishfinders with 8-pin CHIRP connectors. Not sure if this works with your setup? Call or text us at (833) 831-4077 — we'll tell you straight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Bronze housing for fiberglass and wood hulls only (stainless steel SS175H model available for metal hulls). Shaft length 71 mm (2.80\") — drilling required: 95 mm (3-3\/4\") hole for fiberglass or wood hulls. Suitable for boats up to 36 feet with deadrise angles up to 24°.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn the Box:\u003c\/strong\u003e Transducer only. Garmin 8-pin CHIRP cable sold separately. Mounting hardware and installation sealant not included — consult your boat's manual and your fishfinder manual for proper installation procedure.\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":45764299653177,"sku":"108818","price":1399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2685\/5225\/files\/108818XL.jpg?v=1777401263"},{"product_id":"airmar-b175h-transducer-bronze-thru-hull-chirp-12","title":"Airmar B175H Transducer Bronze Thru-Hull CHIRP 12°","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eBuilt for serious anglers running center consoles and smaller boats who need high-frequency precision without the bulk. If you're working shallow structure—reefs, wrecks, tight bottom—and want to separate individual fish from baitballs at a glance, this transducer is purpose-built for that job.\u003c\/p\u003e\n\u003cp\u003eThe B175H is a thru-hull CHIRP transducer that delivers narrow-beam, high-frequency sonar in a low-profile bronze housing. You get 80 kHz of total bandwidth from a single transducer, meaning superior shallow-water detail and bottom definition. The tilted element corrects for your hull's deadrise automatically, so you get clean echoes even at speed—no guesswork about installation angle.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Frequency CHIRP (130–210 kHz)\u003c\/strong\u003e — transmits across 80 kHz of bandwidth from one transducer — gives you exceptional target separation on schooling fish and detailed bottom structure, especially in shallow water where most tournament bass and inshore anglers fish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNarrow Beamwidth (10° to 6°)\u003c\/strong\u003e — focuses your sonar beam tight — means you see fish holding hard against wrecks, pilings, and reef edges instead of false echoes from surrounding water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTilted Element Design\u003c\/strong\u003e — ceramic element is fixed at 12° inside the housing — automatically corrects for 8° to 15° hull deadrise, so you get maximum echo return without manual adjustment or underwater installation complexity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 kW Power with 1000' Max Depth\u003c\/strong\u003e — punches through deep water when you need it, but optimized for shallow-to-medium depths where you'll spend most of your time hunting structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Profile Thru-Hull Housing\u003c\/strong\u003e — flushes nearly flat to your hull — minimizes drag at speed and keeps bottom detail clean even when you're running hard to the next waypoint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth and Temperature Sensing\u003c\/strong\u003e — dual functions built in — no need for a separate temp sensor if your fishfinder accepts temperature input from the transducer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs \u0026amp; What's Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e The B175H connects via 8-pin connector and works with most Airmar-compatible fishfinders (Simrad, Lowrance, Navico systems). It's CHIRP-ready, meaning your unit must support CHIRP frequency sweep or you'll operate it in traditional single-frequency mode. The transducer is rated for fiberglass or wood hulls with 8° to 15° deadrise; maximum deadrise tolerance is 24°. Recommended for boats up to 11 meters (36 feet). Not sure if this works with your setup? Call or text us at (833) 831-4077 — we'll tell you straight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn the Box:\u003c\/strong\u003e B175H bronze thru-hull transducer with 8-pin connector and 71 mm (2.80\") usable shaft length. Installation hardware (sealing washer, fasteners) and transducer cable are typically sold separately; verify with your fishfinder manufacturer or call us to confirm what's needed for your installation.\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":45764299685945,"sku":"47862","price":1399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2685\/5225\/files\/47862XL.jpg?v=1777401264"},{"product_id":"airmar-b175h-transducer-chirp-0-thru-hull","title":"Airmar B175H Transducer CHIRP 0° Thru-Hull","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eBuilt for serious anglers running center consoles and small to mid-size boats who need a compact, high-frequency transducer that doesn't sacrifice performance. If you're targeting structure—wrecks, reefs, rocky points—and want to separate individual fish from baitballs, this is your transducer.\u003c\/p\u003e\n\u003cp\u003eThe B175H is a thru-hull CHIRP transducer built for shallow to mid-depth water where high frequency shines. It runs 130 to 210 kHz with 80 kHz of total bandwidth from a single installation, giving you crisp bottom detail and excellent target separation on the Garmin unit already on your boat. The tilted-element design corrects for hull deadrise automatically, so you get accurate readings whether you're running 0°, 12°, or 20° deadrise without hunting for the sweet spot.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Frequency CHIRP (130–210 kHz)\u003c\/strong\u003e — transmits across an 80 kHz bandwidth in one installation — you get superior shallow-water bottom detail and pinpoint fish holding on wrecks and structure without switching frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNarrow Beamwidth (10° to 6°)\u003c\/strong\u003e — focuses your sonar cone tight, cutting clutter and isolating individual fish from schools and baitfish schools — critical when you're working tight structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTilted Element Design\u003c\/strong\u003e — the ceramic element sits at a fixed angle inside the housing that matches your hull's deadrise — ensures maximum echo return and horizontal orientation without guesswork, so your readings are accurate from the first install.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 kW Power, 1000' Max Depth\u003c\/strong\u003e — punches through to 304 meters with enough power for reliable returns on structure in deep water, then pulls back for precision in shallows.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth and Water Temperature\u003c\/strong\u003e — built-in sensors give you two pieces of critical data without a separate temperature probe, saving install complexity and money.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBronze Thru-Hull Housing\u003c\/strong\u003e — designed for fiberglass and wood hulls; low-profile design sits nearly flush to the hull for clean hydrodynamics and stable readings at speed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs \u0026amp; What's Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Garmin 8-Pin CHIRP transducer connector. This transducer is compatible with current-generation Garmin fish finders and chartplotters that support 8-pin CHIRP transducers. Not sure if this works with your setup? Call or text us at (833) 831-4077 — we'll tell you straight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Hole size requirement is 95 mm (3-3\/4\") for fiberglass or wood hull. Usable shaft length is 71 mm (2.80\"). Maximum deadrise angle is 24°. Suitable for boats up to 36 feet. Also available in stainless steel (SS175H) for aluminum or steel hulls.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn the Box:\u003c\/strong\u003e B175H transducer with 8-pin Garmin connector cable. Mounting bracket and installation hardware sold separately if not included with your Garmin display unit.\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":45764299751481,"sku":"108819","price":1399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2685\/5225\/files\/108819XL.jpg?v=1777401266"},{"product_id":"airmar-b175h-transducer-chirp-20-tilted-bronze-thru-hull","title":"Airmar B175H Transducer CHIRP 20° Tilted Bronze Thru Hull","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eBuilt for serious anglers and charter captains running fiberglass or wooden hulls up to 36 feet who need extreme detail on everything below the boat—from individual baitfish to structure. If you're fishing tournaments or running a guide service, you need sonar that sees what others miss.\u003c\/p\u003e\n\u003cp\u003eThis is Airmar's broadband CHIRP transducer that delivers 80 kHz of total bandwidth from a single installation. You get high-frequency CHIRP (130–210 kHz) with beam angles from 15° down to 9°, plus the ability to see bottom details in water up to 10,000 feet deep. One transducer does the work of multiple units, saving you installation time and money while giving you 5 to 10 times sharper resolution than traditional single-frequency setups.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroadband CHIRP 130–210 kHz\u003c\/strong\u003e — fires a continuous sweep of frequencies instead of a single tone, revealing individual fish, baitfish, and structure with photographic clarity — you'll spot the difference between a suspended bass and a suspended log.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e80 kHz Total Bandwidth\u003c\/strong\u003e — all the sonar power you need in one thru-hull installation, eliminating the need for dual transducers and reducing complexity on your boat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20° Tilted Installation\u003c\/strong\u003e — angled transducer face covers the water column ahead and below, ideal for moving water and deep-structure fishing where you're searching actively.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 kW Power\u003c\/strong\u003e — adequate output for reliable bottom detection and fish marking on boats up to 36 feet in most freshwater and coastal conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBronze Housing\u003c\/strong\u003e — corrosion-resistant construction built for saltwater exposure and long-term durability; thru-hull installation means it stays in the water year-round.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth and Water-Temperature Sensor\u003c\/strong\u003e — real-time temperature and bottom depth integrated into one transducer — fewer sensors to install, cleaner wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXducer ID Technology\u003c\/strong\u003e — automatic transducer recognition on compatible systems, eliminating manual setup and configuration errors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs \u0026amp; What's Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e This transducer works with Airmar-compatible fish finders and chartplotters that support broadband CHIRP. Verify your head unit supports the B175H before purchase. Not sure if this works with your setup? Call or text us at (833) 831-4077 — we'll tell you straight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn the Box:\u003c\/strong\u003e B175H bronze thru-hull transducer body only. You will need to purchase a compatible Mix and Match transducer cable separately — cable length and connector type depend on your specific head unit and installation distance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Thru-hull mount for fiberglass or wood hulls. Requires drilling through the hull and proper sealing. Recommended for boats up to 11 meters (36 feet).\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":45764299817017,"sku":"68016","price":1399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2685\/5225\/files\/68016XL.jpg?v=1777401268"},{"product_id":"airmar-b175h-transducer-chirp-broadband-0-tilt-1kw","title":"Airmar B175H Transducer CHIRP Broadband 0° Tilt 1kW","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eBuilt for serious anglers running fiberglass or wood hulls up to 36 feet who need maximum detail in one transducer installation. Whether you're a tournament competitor, charter captain, or dedicated structure hunter, this is the transducer that delivers the resolution to separate individual baitfish from game fish and distinguish hard bottom from soft structure.\u003c\/p\u003e\n\u003cp\u003eThe B175H is a CHIRP broadband transducer that packs 80 kHz of total bandwidth into a single thru-hull unit. You get high-frequency imaging down to 3,000 meters with 5 to 10 times greater detail than conventional transducers — precise enough to read the water column like a book. One installation, one cable run. That's time and money saved, and cleaner wiring on your boat.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCHIRP Broadband 130–210 kHz\u003c\/strong\u003e — transmits across an 80 kHz bandwidth in a single installation — you get the detail and bottom detection capability that normally requires multiple transducers, saving you space and installation hassle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Frequency Imaging with Beamwidth Control\u003c\/strong\u003e — 15° to 9° beamwidth lets you focus on structure and fish with precision — wider beam catches more water column, narrow beam gives you surgical detail on specific targets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth \u0026amp; Water Temperature\u003c\/strong\u003e — integrated sensor reads both metrics in real time — essential data for understanding what depth fish are holding and whether the water supports your target species.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0° Tilt Mount\u003c\/strong\u003e — sits perfectly perpendicular to your hull for maximum bottom detection and signal strength — the mount most anglers prefer for straight-down imaging on structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 kW Power Output\u003c\/strong\u003e — delivers full-strength signal through typical water conditions and into depth — adequate power for the serious angler fishing structure and suspended fish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBronze Housing\u003c\/strong\u003e — corrosion-resistant construction built to last in saltwater and freshwater environments — you won't be replacing this unit in a few seasons.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExclusive Xducer ID Technology\u003c\/strong\u003e — plug-and-play transducer recognition — your sonar unit automatically identifies the transducer and optimizes settings, eliminating manual configuration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs \u0026amp; What's Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e This transducer requires a compatible Mix and Match Cable sold separately — the cable carries both power and data signal from your sonar unit to the transducer. Verify your fish finder or sonar head supports Airmar CHIRP broadband transducers and confirm cable length requirements for your boat's layout before ordering. Not sure if this works with your setup? Call or text us at (833) 831-4077 — we'll tell you straight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBoat \u0026amp; Hull Requirements:\u003c\/strong\u003e Rated for fiberglass or wood hulls up to 36 feet. Not compatible with aluminum hulls.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn the Box:\u003c\/strong\u003e B175H Bronze Thru Hull Transducer only. Transducer cable sold separately — you'll need to specify the correct Mix and Match Cable for your sonar unit and desired cable length.\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":45764299882553,"sku":"68020","price":1399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2685\/5225\/files\/68020XL.jpg?v=1777401269"},{"product_id":"airmar-b175h-transducer-chirp-bronze-thru-hull-12-tilt","title":"Airmar B175H Transducer CHIRP Bronze Thru Hull 12° Tilt","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eBuilt for serious anglers running fiberglass or wood hulls up to 36 feet who demand maximum sonar detail from a single transducer installation. Whether you're chasing walleye, bass, or saltwater species, this bronze thru-hull transducer pairs the clarity of CHIRP broadband frequency with enough power to paint the bottom in 3,000 meters of water.\u003c\/p\u003e\n\u003cp\u003eThe B175H delivers 80 kHz of total bandwidth through one installation point, giving you exceptional target separation and the ability to distinguish individual baitfish from gamefish in a school. That's not just more information—it's the difference between marking fish and catching them.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCHIRP Broadband Frequency (130–210 kHz)\u003c\/strong\u003e — transmits across a wide range of frequencies in a single ping — you get 5 to 10 times greater detail and resolution than traditional single-frequency transducers, making it possible to see structure and individual fish with clarity that changes how you fish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e80 kHz Total Bandwidth\u003c\/strong\u003e — one transducer delivers the frequency range of multiple units — saves installation time and eliminates the cost and complexity of running multiple transducers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 kW Power Output\u003c\/strong\u003e — enough muscle to reach bottom in 10,000 feet of water with strong signal return — critical for deep offshore work or clear-water lakes where weak signals get lost in the noise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12° Tilt Angle\u003c\/strong\u003e — optimized for forward-looking sonar performance and reduced dead zones directly under your hull — keeps the transducer reading clean water and active structure instead of turbulence from your boat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Water Temperature Sensor\u003c\/strong\u003e — tracks real-time surface temp with fast response — helps you identify thermoclines and seasonal patterns without a separate temperature probe.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBronze Housing\u003c\/strong\u003e — corrosion-resistant in saltwater and freshwater environments — builds durability into a thru-hull installation that'll last.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXducer ID Technology\u003c\/strong\u003e — automatic transducer recognition — your sonar unit identifies this transducer and loads the correct frequency responses automatically, eliminating setup guesswork.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs \u0026amp; What's Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Works with Airmar-compatible sonar systems that support CHIRP broadband transducers. Designed for fiberglass or wood hulls up to 36 feet. Not sure if this works with your setup? Call or text us at (833) 831-4077 — we'll tell you straight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn the Box:\u003c\/strong\u003e The B175H transducer itself. Cable is sold separately via Mix and Match configuration — select your cable length and connector type based on your sonar unit and installation distance.\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":45764299948089,"sku":"68021","price":1399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2685\/5225\/files\/68021XL.jpg?v=1777401270"},{"product_id":"airmar-b175hw-transducer-12-tilt-chirp-wide-beam","title":"Airmar B175HW Transducer 12° Tilt CHIRP Wide Beam","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWho This Is For:\u003c\/strong\u003e Serious anglers running 25-foot fiberglass or wood hulls who want wide-coverage sonar and precise fish detection in one transducer. If you fish shallow to mid-depth water and need to see both structure and suspended fish clearly, this wide-beam CHIRP transducer gives you twice the bottom coverage of traditional high-frequency units.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Summary:\u003c\/strong\u003e The Airmar B175HW is a bronze thru-hull transducer built for speed and coverage. It transmits across a 150–250 kHz range in true CHIRP format, maintaining a constant 25° beam width that blankets more water under your boat than narrow-beam alternatives. That means crisper target separation, bigger return images on your display, and the ability to spot fish you'd miss with conventional sonar.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide-Beam CHIRP (150–250 kHz)\u003c\/strong\u003e — constant 25° beam width across the entire frequency band — you get twice the bottom coverage of traditional high-frequency transducers, so fewer dead zones under the boat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 kHz Total Bandwidth\u003c\/strong\u003e — covers the popular 200 kHz frequency plus extended range — gives your fishfinder maximum flexibility to lock onto both structure and fish in any water column.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12° Tilted Installation\u003c\/strong\u003e — optimized mounting angle for fiberglass and wood hulls — eliminates blind spots and improves target detection when you're moving.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Depth and Temperature Sensor\u003c\/strong\u003e — fast-response readings — you get reliable water temp to track seasonal fish movement without adding a separate sensor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 kW Power Output\u003c\/strong\u003e — strong signal return — penetrates murky water and delivers clean images even in challenging conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXducer ID Technology\u003c\/strong\u003e — automatic transducer recognition — plug it in and your fishfinder knows what it's talking to, eliminating setup guesswork.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs \u0026amp; What's Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e This transducer is CHIRP-ready and works with any modern Airmar-compatible fishfinder that supports broadband frequency. The 12° tilt angle is engineered for boats 25 feet and larger with fiberglass or wood hulls. This product requires a separate Mix and Match cable — you'll need to verify your fishfinder's connector type and cable compatibility before purchase. Not sure if this works with your setup? Call or text us at (833) 831-4077 — we'll tell you straight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn the Box:\u003c\/strong\u003e Airmar B175HW bronze thru-hull transducer with integrated depth and temperature sensor. Cable sold separately — confirm your fishfinder's connector type when ordering.\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":45764300046393,"sku":"68032","price":1749.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2685\/5225\/files\/68032XL.jpg?v=1777401272"},{"product_id":"airmar-b175hw-transducer-20-chirp-thru-hull","title":"Airmar B175HW Transducer 20° CHIRP Thru-Hull","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eBuilt for inshore and pelagic anglers who need excellent target separation and shallow-water detail without sacrificing coverage under the boat. If you're fishing structure in 30 to 150 feet and want to see fish arches clearly on your Garmin display, this wide-beam high-frequency transducer is built for your boat.\u003c\/p\u003e\n\u003cp\u003eThe B175HW is a CHIRP-ready thru-hull transducer that covers 150 to 250 kHz in a constant 25° wide beam. That wider cone means twice the coverage of typical narrow-beam high-frequency units, so you detect suspended fish in the upper water column and get crisp bottom definition. The tilted element design compensates for your hull's deadrise, orienting the ceramic element horizontally for maximum echo return — no guesswork on installation.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide 25° Constant Beamwidth\u003c\/strong\u003e — covers twice the area under your boat compared to narrow-beam transducers, so you detect fish in the upper water column and see clear fish arches on your screen without dead zones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150–250 kHz CHIRP-Ready Frequency Band\u003c\/strong\u003e — 100 kHz of total bandwidth lets you use multiple frequencies from a single transducer, covers the popular 200 kHz sweet spot, and delivers superior bottom detail and fish-target separation in shallow to moderate depths.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 kW Power Output\u003c\/strong\u003e — cuts through clutter and delivers strong echo returns to your display, even in weedy structure or heavily silted bottoms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTilted Element Design\u003c\/strong\u003e — the ceramic element is fixed at a 20° angle inside the housing to correct for your hull's deadrise, ensuring the element sits horizontally and maximizes echo return without recalibration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth and Water-Temperature Sensing\u003c\/strong\u003e — gives you real-time water temperature and precise depth readings, two critical pieces of data for locating active fish throughout the water column.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500-Foot Depth Rating\u003c\/strong\u003e — works reliably down to 152 meters (500 feet), so you're covered for everything from shallow flats to pelagic drops.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs \u0026amp; What's Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Designed for Garmin fish finders with 8-pin CHIRP transducer connectors. This transducer will not work with single-frequency or non-CHIRP Garmin units. Not sure if this matches your setup? Call or text us at (833) 831-4077 — we'll tell you straight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Requirements:\u003c\/strong\u003e Bronze thru-hull housing; fits fiberglass or wood hulls with deadrise up to 24°. Requires a 95 mm (3-3\/4\") hole. Shaft length is 71 mm (2.80\"). Suitable for boats up to 11 meters (36 feet).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e Transducer only. Garmin 8-pin cable is sold separately.\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":45764300341305,"sku":"108813","price":1749.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2685\/5225\/files\/108813XL.jpg?v=1777401273"},{"product_id":"airmar-b175hw-transducer-chirp-0-thru-hull","title":"Airmar B175HW Transducer CHIRP 0° Thru-Hull","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eBuilt for inshore and pelagic anglers running fiberglass boats up to 36 feet who need high-resolution sonar and maximum coverage under the boat in shallow to moderate depths. Whether you're marking baitfish in the upper water column or reading bottom detail on a flat, this transducer delivers the wide-beam performance most high-frequency units can't match.\u003c\/p\u003e\n\u003cp\u003eThe B175HW is a thru-hull CHIRP transducer that operates across 150–250 kHz with a constant 25° beamwidth — twice the coverage of narrow-beam high-frequency alternatives. That wider cone means you see more fish and structure under your boat without sacrificing the sharp bottom definition and target separation that high frequency gives you. At 1 kW of power, it handles depths to 500 feet and works at speed without losing signal clarity.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide-Beam High Frequency (150–250 kHz)\u003c\/strong\u003e — operates across a full 100 kHz bandwidth with a constant 25° cone angle — you get twice the lateral coverage of narrow-beam transducers while keeping the fish-target separation and bottom detail that make high frequency valuable for sight-fishing and structure hunting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCHIRP-Ready\u003c\/strong\u003e — supports full CHIRP sonar capability on compatible Garmin units — you'll see crisp fish arches, suspended baitfish, and layered structure that traditional narrow-band transducers miss.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTilted Element Design\u003c\/strong\u003e — the ceramic element is fixed at 0° inside the housing and corrects automatically for your hull's deadrise when installed properly — no manual aiming required; you get maximum echo return and clean signal at all speeds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 kW Power Output\u003c\/strong\u003e — strong enough to maintain signal clarity at speed and in rougher conditions — you won't lose bottom contact or fish targets when you're running 20+ knots.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth and Temperature Sensing\u003c\/strong\u003e — integrated sensors give you real-time water temperature and precise depth readings — critical for tracking seasonal patterns and finding thermoclines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBronze Thru-Hull Housing\u003c\/strong\u003e — designed for fiberglass and wood hulls; the low-profile installation keeps display resolution clean when the boat is on plane.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs \u0026amp; What's Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e This transducer connects to Garmin units with an 8-pin CHIRP connector. It is compatible with Garmin GPSMAP, echoMAP, and Panoptix-capable chartplotters that support CHIRP transducers. Works on boats with up to 24° of hull deadrise. Not sure if this works with your setup? Call or text us at (833) 831-4077 — we'll tell you straight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat You Get:\u003c\/strong\u003e Airmar B175HW transducer with 8-pin Garmin connector cable. You'll need a thru-hull hole 3-3\/4 inches in diameter; the transducer shaft is 2.80 inches usable length. Installation hardware and sealant are not included — source these separately based on your hull material.\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":45764300406841,"sku":"108812","price":1749.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2685\/5225\/files\/108812XL.jpg?v=1777401275"},{"product_id":"airmar-b175hw-transducer-chirp-150250-khz-0-tilt","title":"Airmar B175HW Transducer CHIRP 150–250 kHz 0° Tilt","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWho This Is For:\u003c\/strong\u003e If you're running a boat 25 feet or larger with a CHIRP-ready fish finder, this is the transducer you want under your hull. It's built for anglers who fish structure-heavy water and need to see everything from suspended fish in the water column to the exact bottom composition — and see it clearly on your display.\u003c\/p\u003e\n\u003cp\u003eThe B175HW is Airmar's wide-beam CHIRP transducer that doubles your coverage under the boat compared to narrow-beam alternatives. It chirps across 150–250 kHz with a constant 25° beam width that stays consistent across the entire frequency band. That means you get the precision of high-frequency sonar without sacrificing the broad picture view of what's happening beneath you.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide 25° Constant Beamwidth\u003c\/strong\u003e — covers twice the area under your boat compared to standard high-frequency transducers — you'll catch suspended fish and structure that narrow beams miss, and see it all on one screen.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150–250 kHz CHIRP Frequency Range\u003c\/strong\u003e — delivers 100 kHz of total bandwidth in a single transducer — gives you the coverage of multiple frequencies without swapping hardware, and includes the popular 200 kHz fishing frequency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrisper, Larger Return Images\u003c\/strong\u003e — the constant 25° beam creates bigger, clearer targets on your display — fish and structure stand out instantly, not as blurry hints.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast-Response Water Temperature Sensor\u003c\/strong\u003e — built-in temp reading helps you identify thermoclines and seasonal patterns — no need for a separate temperature probe.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBronze Thru-Hull Construction\u003c\/strong\u003e — weighs less and installs cleaner than traditional bronze, with no speed loss — fits fiberglass or wood hulls 25 feet and above.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0° Tilt, 1kW Power\u003c\/strong\u003e — straight-down orientation with solid power output for deep and shallow water — no angle compensation needed in your sonar settings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExclusive Xducer ID Technology\u003c\/strong\u003e — automatic transducer recognition by compatible fish finders — one less thing to configure before you leave the dock.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs \u0026amp; What's Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e This transducer works with any CHIRP-ready fish finder or sonar system that supports the Airmar connector and frequency band (150–250 kHz). Your display must be CHIRP-enabled to get the full benefit of this transducer's broadband performance. If you're upgrading from an older system, confirm your head unit supports these frequencies before ordering. Not sure if this works with your setup? Call or text us at (833) 831-4077 — we'll tell you straight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn the Box:\u003c\/strong\u003e Transducer only. Requires a Mix and Match cable (sold separately) to connect to your fish finder — measure your cable run and confirm connector type with us before checkout.\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":45764300668985,"sku":"68031","price":1749.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2685\/5225\/files\/68031XL.jpg?v=1777401276"},{"product_id":"airmar-b175hw-transducer-chirp-25-wide-beam-20-tilt","title":"Airmar B175HW Transducer CHIRP 25° Wide Beam 20° Tilt","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWho This Is For:\u003c\/strong\u003e Serious anglers running boats 25 feet and larger who fish with CHIRP-ready fish finders and want wider bottom coverage without sacrificing detail. If you're chasing walleye, stripers, or deep structure and tired of narrow beam blind spots under your boat, this wide-beam transducer is built for you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Summary:\u003c\/strong\u003e The Airmar B175HW is a thru-hull CHIRP transducer that delivers twice the bottom coverage of standard high-frequency narrow-beam units while keeping crystal-clear target definition. It chirps across 100 kHz of bandwidth (150–250 kHz) with a constant 25-degree beam angle, meaning you see more of what's happening under your boat at all depths. Bronze construction and a 20-degree tilt make it reliable in fiberglass or wood hulls.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide 25-Degree Constant Beamwidth\u003c\/strong\u003e — maintains the same beam angle across the entire 150–250 kHz frequency band — you'll see twice as much bottom structure and suspended fish in one pass compared to narrow-beam alternatives.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 kHz Bandwidth CHIRP\u003c\/strong\u003e — covers the critical 200 kHz fishing frequency plus the full range from 150–250 kHz in a single transducer — no need to switch frequencies or stack multiple units.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth and Fast-Response Water Temperature\u003c\/strong\u003e — dual sensors give you real-time temperature data and accurate depth readings — essential for finding the thermal layer and following seasonal patterns.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBronze Thru-Hull Design with 20-Degree Tilt\u003c\/strong\u003e — engineered for permanent fiberglass or wood hull mounting on boats 25 feet and above — the tilt angle optimizes beam coverage for forward-scanning sonar systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExclusive Xducer ID Technology\u003c\/strong\u003e — automatic transducer recognition simplifies installation and setup with compatible systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs \u0026amp; What's Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e This transducer is designed for CHIRP-ready fish finders that support the 150–250 kHz frequency band. It requires a Mix and Match Cable (sold separately) to connect to your unit — confirm your fish finder supports this transducer before purchase. Not sure if this works with your setup? Call or text us at (833) 831-4077 — we'll tell you straight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn the Box:\u003c\/strong\u003e Airmar B175HW Bronze Thru Hull Transducer. Cable sold separately.\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":45764300701753,"sku":"68017","price":1749.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2685\/5225\/files\/68017XL.jpg?v=1777401278"},{"product_id":"airmar-b175hw-transducer-chirp-wide-beam-12-thru-hull","title":"Airmar B175HW Transducer CHIRP Wide Beam 12° Thru-Hull","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eBuilt for inshore and pelagic anglers running boats up to 36 feet who need high-resolution sonar with maximum coverage under the hull. If you fish shallow structure, suspended baitfish, or deep water and want to see both detail and the bigger picture on one transducer, this is your choice.\u003c\/p\u003e\n\u003cp\u003eThe B175HW is a wide-beam, high-frequency transducer that gives you twice the coverage of a standard narrow-beam unit without sacrificing bottom detail or fish separation. It runs across a full 100 kHz bandwidth and handles CHIRP technology, which means your sonar will punch through clutter and show you cleaner fish marks. Install it thru-hull on a fiberglass or wood hull with deadrise up to 24 degrees, and you'll get reliable depth and temperature data down to 500 feet.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide 25-Degree Beamwidth\u003c\/strong\u003e — covers twice the area under your boat compared to narrow-beam transducers — you'll detect fish suspended in the upper water column and see complete fish arches on your display instead of missing targets between passes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150–250 kHz High Frequency\u003c\/strong\u003e — delivers superior shallow-water performance and excellent bottom detail — ideal for resolving structure, distinguishing fish from debris, and working depths from the shallows down to 500 feet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCHIRP Ready with 100 kHz Total Bandwidth\u003c\/strong\u003e — runs the full frequency range in one transducer, including the standard 200 kHz fishing frequency — you get maximum flexibility without swapping hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 kW Power Output\u003c\/strong\u003e — strong acoustic pulse cuts through thermoclines and suspended particles — you'll maintain performance in stained water and heavy algae conditions where other transducers fade.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTilted Element Housing\u003c\/strong\u003e — ceramic element is angled to match your hull's deadrise and installed nearly flush with the bottom — this orientation maximizes echo return to the transducer and keeps your sonar accurate even at speed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth and Temperature Sensing\u003c\/strong\u003e — tracks water temperature in real time — use it to find thermocline breaks and stay on seasonal bite patterns without a separate sensor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs \u0026amp; What's Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Connects to Garmin fishfinders and chartplotters via 8-pin connector. This transducer is CHIRP-ready and works with any Garmin unit equipped with an 8-pin transducer port. Not sure if this works with your Garmin? Call or text us at (833) 831-4077 — we'll tell you straight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat You Get:\u003c\/strong\u003e The B175HW transducer and Garmin 8-pin mix \u0026amp; match cable. You'll need to drill a 3-3\/4-inch hole in your hull and install the thru-hull fitting — this is a job for a professional unless you've done it before.\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":45764300767289,"sku":"108814","price":1749.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2685\/5225\/files\/108814XL.jpg?v=1777401280"},{"product_id":"airmar-b175l-transducer-12-chirp-1kw-garmin","title":"Airmar B175L Transducer 12° CHIRP 1kW Garmin","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eBuilt for center console and smaller boat anglers running Garmin systems who need solid deep-water performance without oversized hardware. The B175L fits flush to your hull and handles everything from coastal work to offshore bottom-hunting on boats up to 36 feet.\u003c\/p\u003e\n\u003cp\u003eThis is a straightforward, single-frequency CHIRP transducer built around low-frequency sonar (40–60 kHz) that reaches 2,500 feet and delivers 1 kW of power. The real difference is the tilted ceramic element—it automatically corrects for your hull's deadrise, so you get true vertical sonar readings without drilling multiple holes or running complex installations. Pair it with your Garmin chartplotter and you're fishing, not troubleshooting.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Frequency CHIRP (40–60 kHz)\u003c\/strong\u003e — transmits across a 20 kHz bandwidth in a single installation — you get excellent coverage and deep-water tracking without switching frequencies or adding extra transducers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTilted Element Design\u003c\/strong\u003e — ceramic element is fixed at 12° inside the housing to automatically correct for hull deadrise when installed nearly flush — means accurate depth and temperature readings straight down, not angled off to the side where you can't use them.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 kW Power Output\u003c\/strong\u003e — enough punch to reach deep structure and get clean returns even when you're moving or in rough water—no weak signal surprises when you need them most.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e32° to 21° Beamwidth\u003c\/strong\u003e — widens at shallow depths, narrows at depth—good cone coverage for finding scattered structure without painting false targets around the boat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth and Temperature\u003c\/strong\u003e — dual sensing functions for water conditions and bottom tracking without extra gear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Profile Bronze Housing\u003c\/strong\u003e — installs flush to fiberglass or wood hulls, looks clean, and stays out of the prop wash on smaller fast boats.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGarmin 8-Pin Connectivity\u003c\/strong\u003e — works with current Garmin chartplotters and fish finders using the standard Mix \u0026amp; Match cable—no adapter hunts or proprietary complications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs \u0026amp; What's Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Designed for Garmin 8-pin CHIRP-ready systems. Works on stepped, planing, and displacement hulls with up to 24° of deadrise. Maximum vessel size is 36 feet LOA. Installation requires a 3-3\/4\" hole in fiberglass or wood hulls. Not sure if this works with your Garmin setup? Call or text us at (833) 831-4077—we'll tell you straight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn the Box:\u003c\/strong\u003e B175L transducer with 8-pin Garmin connector and 2.80\" usable shaft length. Mounting hardware and installation template not specified—check your Garmin documentation for any additional components needed for your hull type.\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":45764300800057,"sku":"108809","price":1799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2685\/5225\/files\/108809XL.jpg?v=1777401281"},{"product_id":"airmar-b175l-transducer-1kw-chirp-0-thru-hull","title":"Airmar B175L Transducer 1kW CHIRP 0° Thru-Hull","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eBuilt for anglers running smaller center consoles, open boats, and stepped hulls who need reliable depth and temperature data without overcomplicating their electronics setup. The B175L pairs low-frequency sonar with a compact thru-hull design that sits nearly flush with your hull, keeping your boat cleaner while delivering accurate readings at speed.\u003c\/p\u003e\n\u003cp\u003eThis is a single-frequency, CHIRP-ready transducer designed to give you solid deep-water performance in a package sized for boats up to 36 feet. The 40–60 kHz range excels at tracking structure and bottom composition, and the 1 kW power output punches through in deeper water. It's built to work straight into your Garmin system with an 8-pin connector—no adapters needed.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Frequency CHIRP Sonar (40–60 kHz)\u003c\/strong\u003e — sends a continuous sweep of frequencies instead of a single tone, giving you better target separation and cleaner images — you'll distinguish individual fish from bait balls and see hard bottom versus soft bottom with confidence.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 kW Transducer Power\u003c\/strong\u003e — delivers strong acoustic output for deep-water work and maintains signal integrity even at trolling speeds — critical if you're fishing offshore structure or suspended fish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTilted Element Design (0° angle)\u003c\/strong\u003e — the ceramic element inside the housing is factory-angled to match your hull's deadrise, so the sonar beam points straight down even on hulls with significant angle — you get maximum echo return and dead-accurate depth without recalibration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Profile Thru-Hull Housing\u003c\/strong\u003e — installs nearly flush with your hull, reducing turbulence and underwater noise that can degrade sonar quality at speed — your screen stays sharp and clean even at plane.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth and Water-Temperature Sensing\u003c\/strong\u003e — tracks bottom and temp changes in real time, helping you identify thermal breaks and locate temperature-sensitive species.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e32° to 21° Beamwidth\u003c\/strong\u003e — wider cone at shallow depths, narrower at depth, giving you excellent coverage and precision throughout the water column.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBronze Housing\u003c\/strong\u003e — purpose-built for fiberglass and wood hulls; resists corrosion in saltwater and brackish environments without sacrificing durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2,500-Foot Max Depth\u003c\/strong\u003e — rated for deep-water work if your boat ventures into blue water or operates over offshore structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGarmin 8-Pin Connector\u003c\/strong\u003e — direct plug-and-play compatibility with Garmin CHIRP-enabled fish finders — no proprietary adapters or cross-platform hassles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs \u0026amp; What's Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e This transducer is built for Garmin fish finders with 8-pin CHIRP transducer ports. It will not work with Lowrance, Humminbird, or Simrad systems. Confirm your Garmin unit supports CHIRP-ready transducers before ordering. Not sure if this works with your setup? Call or text us at (833) 831-4077 — we'll tell you straight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Requirements:\u003c\/strong\u003e The B175L installs thru-hull on fiberglass or wood hulls with a 3-3\/4\" hole. Maximum hull deadrise is 24°. Usable shaft length is 2.80 inches. For metal hulls, you'll need the stainless steel version (SS175L) instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn the Box:\u003c\/strong\u003e Transducer only. You'll need a separate 8-pin Garmin transducer cable to connect this to your fish finder head unit.\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":45764300963897,"sku":"108811","price":1799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2685\/5225\/files\/108811XL.jpg?v=1777401283"},{"product_id":"airmar-b175l-transducer-chirp-12-bronze-thru-hull","title":"Airmar B175L Transducer CHIRP 12° Bronze Thru-Hull","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eBuilt for center console and small-boat anglers who need reliable depth and temperature data without the bulk of larger transducers. If you fish waters deeper than 500 feet or want solid sonar performance in a low-profile package, this is your transducer.\u003c\/p\u003e\n\u003cp\u003eThe B175L is a bronze thru-hull transducer engineered for speed and accuracy. It runs on low frequencies (40–60 kHz) with enough power to track structure and bottom in deep water, and its tilted ceramic element self-corrects for your hull's deadrise angle — so you get accurate depth readings and clean sonar even when you're running at speed.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-frequency CHIRP ready (40–60 kHz)\u003c\/strong\u003e — transmits a full spectrum instead of a fixed frequency, giving you up to 20 kHz of bandwidth in one installation for superior deep-water performance and target separation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTilted element design\u003c\/strong\u003e — the ceramic element is fixed at 12° inside the housing; when installed flush to your hull, it automatically compensates for deadrise and points the beam straight down, maximizing echo return and eliminating dead zones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 kW power output\u003c\/strong\u003e — enough punch to reach 2,500 feet and maintain a strong signal in thermoclines, layered structure, and open water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e32° to 21° beamwidth\u003c\/strong\u003e — wider cone at shallow depths for fast scanning, narrower cone at depth for precise bottom tracking and structure definition.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth and temperature sensing\u003c\/strong\u003e — dual-function output lets you read both metrics on compatible displays; water temp is fast-responding, so you catch thermocline changes in real time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-profile bronze housing\u003c\/strong\u003e — fits fiberglass and wood hulls with minimal turbulence, critical for clean sonar at cruising speed; bronze is corrosion-resistant in saltwater applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs \u0026amp; What's Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e This transducer is CHIRP-ready and requires a Mix \u0026amp; Match cable — you'll need to source the cable separately based on your fish finder's connector type (Humminbird, Lowrance\/Simrad, Garmin, etc.). Confirm your display's cable before ordering. Not sure what cable you need? Call or text us at (833) 831-4077 and we'll match it to your setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Specs:\u003c\/strong\u003e Maximum deadrise 24°; shaft length 71 mm (2.80\"); fiberglass\/wood hull requires 95 mm (3-3\/4\") hole; maximum vessel length 36 feet; maximum depth rating 762 m (2,500 feet). Weight: 2.7 kg (6 lbs).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e Transducer only. Cable sold separately — order the Mix \u0026amp; Match cable that matches your display connector type.\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":45764300996665,"sku":"108810","price":1799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2685\/5225\/files\/108810XL.jpg?v=1777401284"},{"product_id":"airmar-b175l-transducer-chirp-20-tilted-element","title":"Airmar B175L Transducer CHIRP 20° Tilted Element","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eBuilt for center console and smaller boat owners running Garmin systems who need reliable depth and temperature data without breaking the budget or taking up real estate on the hull. This is your transducer if you're fishing 40 to 2,500 feet and want straightforward sonar performance that doesn't demand a complete electronics overhaul.\u003c\/p\u003e\n\u003cp\u003eThe B175L is a low-profile thru-hull transducer that trades fancy imaging for rock-solid depth and temperature readings across a broad frequency range. Its tilted ceramic element compensates for hull deadrise, meaning your sonar beam points straight down even on boats with significant V-shape — no guessing on depth, no false bottoms.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTilted Element Design\u003c\/strong\u003e — ceramic element fixed at 20° inside the housing to automatically correct for hull deadrise up to 24° — your depth readings stay accurate whether you're on a bay boat or a deep-V offshore machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCHIRP-Ready Single-Band Sonar\u003c\/strong\u003e — transmits across 40 to 60 kHz with up to 20 kHz of total bandwidth — delivers excellent coverage and target separation in both shallow and deep water without switching frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 kW Power Output\u003c\/strong\u003e — sufficient punch for solid bottom definition and fish marking to maximum depths — won't give you the sensitivity of a 2 kW unit, but it's more than adequate for recreational fishing and structure hunting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth and Temperature Sensing\u003c\/strong\u003e — two critical pieces of water information from a single installation — know when you've crossed a thermocline or found the temperature break where fish concentrate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Profile Bronze Housing\u003c\/strong\u003e — sits nearly flush with the hull for minimal drag and clean aesthetics on fiberglass or wood — requires only a 3-3\/4\" hole and mounts in boats up to 36 feet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e32° to 21° Beamwidth\u003c\/strong\u003e — wider cone at lower frequencies for broad-area searching, tighter cone at higher frequencies for precise target identification — adapts automatically as you adjust frequency.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs \u0026amp; What's Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Works exclusively with Garmin systems using an 8-pin connector — confirm your fishfinder or chartplotter has an available 8-pin transducer port before ordering. This transducer is CHIRP-ready, meaning it will take advantage of CHIRP functionality if your Garmin unit supports it. Not sure if this works with your setup? Call or text us at (833) 831-4077 — we'll tell you straight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Bronze housing is designed for fiberglass and wood hulls only — if you have a metal or aluminum hull, order the SS175L stainless steel version instead. Maximum hull deadrise angle is 24°; if your boat is built with more deadrise than that, the tilted element won't fully compensate. Usable shaft length is 2.80 inches with a maximum depth rating of 2,500 feet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn the Box:\u003c\/strong\u003e Transducer only — the Garmin 8-pin Mix and Match cable is sold separately. You'll also need a cable run from your transducer to your fishfinder or chartplotter.\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":45764301062201,"sku":"108808","price":1799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2685\/5225\/files\/108808XL.jpg?v=1777401285"},{"product_id":"airmar-b175l-transducer-chirp-bronze-thru-hull-20","title":"Airmar B175L Transducer CHIRP Bronze Thru-Hull 20°","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWho This Is For:\u003c\/strong\u003e Anglers upgrading an existing fish finder system or building a custom sonar setup who need a reliable, mid-range thru-hull transducer. This transducer works best on boats where you're retrofitting or mixing components from different manufacturers — you get solid depth and temperature data without buying a complete system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Summary:\u003c\/strong\u003e The B175L is a bronze thru-hull transducer that delivers stable CHIRP sonar in the 40–60 kHz range at 1kW power. It reads depth and water temperature, mounts flush or tilted through your hull, and pairs with compatible fish finders via a network or direct cable connection. It's built for serious anglers who know exactly what electronics they need and aren't locked into a single manufacturer's ecosystem.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCHIRP Sonar (40–60 kHz)\u003c\/strong\u003e — transmits a range of frequencies instead of a single tone, producing clearer target separation and structure detail — fish and bottom clutter won't blur together on your screen.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1kW Power Output\u003c\/strong\u003e — delivers enough punch to read structure and fish at realistic depths on lakes and coastal waters — adequate for most recreational fishing without overkill electrical demands.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBronze Thru-Hull Housing\u003c\/strong\u003e — corrosion-resistant construction rated for saltwater and freshwater — you won't worry about material degradation in harsh conditions or long layups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20° Beam Angle\u003c\/strong\u003e — narrow cone focuses sonar energy directly below your boat for concentrated bottom detail — ideal if you're marking specific spots or reading tight structure like ledges and drop-offs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlush and Tilted Mount Options\u003c\/strong\u003e — installs level with your hull or angled back to reduce turbulence and improve readings when underway — you can optimize the install for your hull design and typical cruising speed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth and Temperature Sensing\u003c\/strong\u003e — logs both critical data points on a single transducer — no need for separate temperature sensors if your display handles dual-function transducers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs \u0026amp; What's Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e This transducer works with fish finders that accept CHIRP transducers in the 40–60 kHz band and support thru-hull mounts. Common compatible brands include Humminbird, Lowrance, Simrad, and Garmin — but verify your specific display unit before ordering, since networking standards vary. Not sure if this works with your setup? Call or text us at (833) 831-4077 — we'll tell you straight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn the Box:\u003c\/strong\u003e Transducer head only. You will need to purchase a compatible cable separately — the product title specifies 'Needs Mix \u0026amp; Match Cable' because Airmar sells this as a transducer element, not a complete plug-and-play unit. Confirm your display's cable type and length before checkout.\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":45764301094969,"sku":"75521","price":1799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2685\/5225\/files\/75521XL.jpg?v=1777401287"},{"product_id":"airmar-b175m-transducer-12-thru-hull-1kw-fgarmin","title":"Airmar B175M Transducer 12° Thru-Hull 1kW f\/Garmin","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eBuilt for serious anglers running Garmin systems who fish mid-range depths and need reliable structure definition from shallow flats to deeper offshore grounds. This transducer handles everything from coastal trips to Great Lakes work, especially on boats with moderate deadrise angles that benefit from a tilted-element design.\u003c\/p\u003e\n\u003cp\u003eThe B175M is a medium-frequency workhorse that balances coverage, range, and target separation. It'll show you fish at depths past 1,500 feet, deliver clean bottom detail in moderate water, and give you the beamwidth flexibility to work different depths without switching hardware. On the water, that means one transducer that performs across your entire fishing calendar — whether you're hunting suspended fish mid-season or reading structure on shallow spring flats.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedium Frequency (85–135 kHz)\u003c\/strong\u003e — operates in the sweet spot between shallow-water definition and deep-water penetration — you get solid structure returns and fish separation from 30 feet to 1,500 feet without the dead zones that plague single-frequency designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCHIRP-Ready Single-Band\u003c\/strong\u003e — delivers 50 kHz of total bandwidth from one transducer, meaning cleaner target resolution and faster response as conditions change — your screen updates faster and clutter drops when you need it most.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTilted Element Design\u003c\/strong\u003e — the ceramic element is fixed at 12 degrees inside the housing to automatically correct for your hull's deadrise angle (up to 24 degrees) — this keeps the sonar beam aimed straight down even on boats with aggressive deadrise, eliminating the blind spots you'd get from a straight transducer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 kW Power Output\u003c\/strong\u003e — enough punch to reach deep water and penetrate hard bottom without overkill that creates noise or excess power draw — solid balance for extended days on the water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBronze Housing\u003c\/strong\u003e — built for fiberglass or wood hulls, resists corrosion in saltwater and freshwater — you're not replacing this in three years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Profile Thru-Hull Mount\u003c\/strong\u003e — installs nearly flush to your hull for clean water flow at speed — maintains sonar accuracy even at plane, and minimizes turbulence that degrades readings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth and Temperature Sensing\u003c\/strong\u003e — built-in water-temperature output pairs with your Garmin display so you're not installing a separate temp sensor — one less hole in the hull.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs \u0026amp; What's Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e This transducer ships with a Garmin 8-pin Mix \u0026amp; Match cable and is fully compatible with all Garmin CHIRP-ready sonar systems. Works with HELIX, ECHOMAP, and GPSMAP series units. Not sure if this fits your setup? Call or text us at (833) 831-4077 — we'll tell you straight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Details:\u003c\/strong\u003e Thru-hull mount with 55 mm (2.18 inch) usable shaft length. Requires a 95 mm (3¾ inch) hole in fiberglass or wood hulls, or 105 mm (4⅛ inch) in metal hulls. Handles hull deadrise angles up to 24 degrees. Weight is 2.7 kg (6 lbs). The urethane acoustic window is durable and resistant to impact damage from debris or accidental strikes.\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":45764301160505,"sku":"108816","price":1299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2685\/5225\/files\/108816XL.jpg?v=1777401289"},{"product_id":"airmar-b175m-transducer-1kw-chirp-0-thru-hull","title":"Airmar B175M Transducer 1kW CHIRP 0° Thru-Hull","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWho This Is For:\u003c\/strong\u003e Serious anglers fishing freshwater lakes and coastal waters on fiberglass or wooden hulls who want dependable medium-frequency sonar with extended depth range. If you're running a Garmin system and need clean fish separation and bottom detail from shallow to deep water, this transducer delivers without complexity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Summary:\u003c\/strong\u003e The B175M is a thru-hull transducer built around medium frequency (85–135 kHz) that gives you the sweet spot between coverage and precision. It'll read fish and structure clearly at depths up to 1,500 feet, and the 0° tilted element automatically corrects for your hull's deadrise so you get maximum signal return without dead zones. At 1 kW of power with CHIRP capability, this is a workhorse transducer that does one job exceptionally well—seeing what's below your boat at speed.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedium Frequency 85–135 kHz\u003c\/strong\u003e — covers the middle ground between shallow-water precision and deep-water reach — means you get strong fish targets and clear bottom definition whether you're fishing 20 feet or 400 feet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 kW Power Output\u003c\/strong\u003e — delivers strong, clean signal with minimal noise — critical for maintaining image clarity at speed and in rough conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTilted Element Design\u003c\/strong\u003e — the ceramic element is fixed at 0° inside the housing to automatically correct for hull deadrise up to 24° — you install it nearly flush and the transducer self-orients; no guessing, no signal loss to misalignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16° to 11° Beamwidth\u003c\/strong\u003e — focused cone that covers a defined area beneath the boat — narrow enough for precision, wide enough to keep targets in view when you're moving.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth and Fast-Response Temperature Sensing\u003c\/strong\u003e — dual functionality means you're reading water temp in real time — essential for finding thermoclines and seasonal fish location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCHIRP-Ready with 50 kHz Bandwidth\u003c\/strong\u003e — single transducer can operate across a broad frequency range — gives you flexibility to dial in the best frequency for depth and bottom type as conditions change.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Profile Thru-Hull Housing\u003c\/strong\u003e — minimal drag, sits nearly flush with your hull — maintains clean sonar images even at plane.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBronze Housing\u003c\/strong\u003e — corrosion-resistant and durable in freshwater and light saltwater — built to outlast the season.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs \u0026amp; What's Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e The B175M connects via Garmin 8-pin Mix \u0026amp; Match connector, meaning it works with modern Garmin fish finders that support CHIRP transducers. If you're unsure whether this fits your Garmin unit, call or text us at (833) 831-4077—we'll confirm compatibility straight away.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Designed for fiberglass or wooden hulls with up to 24° deadrise. Requires a 3¾\" (95 mm) hole for fiberglass\/wood hulls or 4⅛\" (105 mm) for metal hulls. Usable shaft length is 2.18 inches.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn the Box:\u003c\/strong\u003e Transducer only with Garmin 8-pin connector attached. Cable and mounting hardware sold separately depending on your boat setup.\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":45764301226041,"sku":"108817","price":1299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2685\/5225\/files\/108817XL.jpg?v=1777401291"},{"product_id":"airmar-b175m-transducer-bronze-thru-hull-20","title":"Airmar B175M Transducer Bronze Thru-Hull 20°","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eBuilt for serious anglers who fish mid-depth structure on boats with deadrise up to 24 degrees — walleye and bass fishermen who need reliable depth, clean target separation, and extended range without overcomplicating their sonar setup.\u003c\/p\u003e\n\u003cp\u003eThe B175M is a medium-frequency thru-hull transducer that balances coverage, depth capability, and bottom detail in one straightforward package. Running 85–135 kHz with 1 kW of power, it reads fish and structure clearly to 1,500 feet and delivers the kind of bottom resolution that separates keeper fish from junk on your display. The tilted element design automatically corrects for your hull's deadrise, so you get maximum echo return no matter what angle your transom sits at.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedium Frequency (85–135 kHz)\u003c\/strong\u003e — balances wide coverage under the boat with excellent bottom detail and fish-target separation — you get accurate readings from shallow flats through mid-depth structure without switching frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 kW Power Output\u003c\/strong\u003e — delivers strong, clear returns in various water conditions and depths — cleaner target definition means you're not chasing false readings on the bottom.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTilted Element Design\u003c\/strong\u003e — ceramic element is fixed at 20° to automatically correct for hull deadrise — ensures the transducer beam stays perpendicular to the bottom regardless of your boat's running angle, so your depth and fish targets stay true.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16° to 11° Beamwidth\u003c\/strong\u003e — narrow enough to isolate targets precisely, wide enough to cover the strike zone — you'll distinguish individual fish from baitballs and see hard structure clearly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Depth 1,500 Feet\u003c\/strong\u003e — reaches deep structure and offshore ledges most recreational anglers will ever fish — built for boats that venture beyond typical shallow-water fishing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth and Temperature Sensing\u003c\/strong\u003e — tracks water temperature in real time alongside depth — critical data for seasonal patterns and finding the right thermal zones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Profile Bronze Housing\u003c\/strong\u003e — fits flush into fiberglass or wood hulls with minimal drag — bronze resists corrosion in saltwater and brackish environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGarmin 8-Pin CHIRP Connector\u003c\/strong\u003e — integrates directly with compatible Garmin chartplotters — plug-and-play compatibility with your existing sonar head.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs \u0026amp; What's Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Works exclusively with Garmin fishfinders and chartplotters equipped with an 8-pin CHIRP transducer connector. The transducer is CHIRP-ready, meaning it supports Garmin's CHIRP sonar technology for even clearer target definition if your head unit supports it. Designed for fiberglass and wood hulls with deadrise angles up to 24 degrees. Not sure if this fits your boat or Garmin unit? Call or text us at (833) 831-4077 — we'll confirm compatibility straight away.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn the Box:\u003c\/strong\u003e B175M transducer with Garmin 8-pin connector cable. The transducer mounts via thru-hull fitting (hole size 95 mm for fiberglass\/wood hulls). Shaft length is 55 mm (2.18\"), accommodating standard hull thickness on most recreational boats.\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":45764301324345,"sku":"108815","price":1299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2685\/5225\/files\/108815XL.jpg?v=1777401292"},{"product_id":"airmar-b175m-transducer-chirp-12-tilt","title":"Airmar B175M Transducer CHIRP 12° Tilt","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eBuilt for serious anglers running fiberglass or wood boats up to 36 feet who need a thru-hull transducer that delivers tournament-grade sonar detail without breaking the bank. If you're fishing structure-heavy water and want to see individual baitfish instead of just blobs on your screen, this is your transducer.\u003c\/p\u003e\n\u003cp\u003eThe B175M is a CHIRP broadband transducer that covers 85 to 135 kHz in a single installation—meaning you get 50 kHz of total bandwidth without stacking multiple transducers. It detects bottom in freshwater down to 10,000 feet and reads water temperature in real time. The 12-degree tilt lets you aim the cone away from your boat's deadrise, eliminating the cone distortion that kills detail on faster hulls.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedium CHIRP (85–135 kHz)\u003c\/strong\u003e — transmits a continuous sweep across a wide frequency band instead of a single tone — you get 5 to 10 times more detail and can distinguish between individual baitfish, game fish, and hard structure at a glance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kHz of total bandwidth\u003c\/strong\u003e — covers popular fishing frequencies at 88 and 107 kHz plus everything in between — one transducer does the work of a dual-frequency setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12-degree tilt\u003c\/strong\u003e — angles the sonar cone to match your hull's deadrise — eliminates cone shadow and keeps your readings sharp whether you're idling or running full throttle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast-response water temperature sensor\u003c\/strong\u003e — reads and displays live water temp on your fishfinder — critical for matching the season and finding active fish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBronze housing\u003c\/strong\u003e — corrosion-resistant and durable in saltwater splash zones and freshwater — lasts years longer than aluminum in harsh conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth capability to 10,000 feet\u003c\/strong\u003e — overkill for most recreational fishing, but you're not limited if you explore deep structure or troll offshore.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs \u0026amp; What's Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e This transducer works with any fishfinder that accepts a standard thru-hull 12-degree tilt transducer and supports CHIRP sonar. It is compatible with Airmar-certified units from Humminbird, Lowrance, Simrad, Garmin, and other major brands. Check your fishfinder's manual or call us at (833) 831-4077 to confirm compatibility before ordering — we'll tell you straight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn the Box:\u003c\/strong\u003e The B175M transducer housing only. You will need to purchase a transducer cable separately (sold as Mix and Match Cable). The cable connects the transducer to your fishfinder's control head.\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":45764301455417,"sku":"68034","price":1299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2685\/5225\/files\/68034XL.jpg?v=1777401293"},{"product_id":"airmar-b175m-transducer-chirp-1kw-20-tilt","title":"Airmar B175M Transducer CHIRP 1kW 20° Tilt","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eBuilt for serious anglers and charter captains running boats up to 36 feet who need tournament-grade sonar detail without installing multiple transducers. The B175M is your choice if you're fishing fiberglass or wood hulls and want one broadband transducer that covers everything from shallow structure to deep offshore targets.\u003c\/p\u003e\n\u003cp\u003eThis is a CHIRP broadband transducer that delivers 50 kHz of total bandwidth from a single installation. That means one hole through your hull, one cable run, one transducer doing the work of what used to take two or three units. You get medium-frequency CHIRP coverage (85–135 kHz) tuned to the popular 88 and 107 kHz fishing frequencies, with enough bandwidth and resolution to distinguish individual baitfish from gamefish and spot the hard structure that holds fish. The 20° tilt mount and 1 kW power rating make it aggressive enough for rough water and deep applications.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCHIRP Broadband 50 kHz Bandwidth\u003c\/strong\u003e — covers 85–135 kHz in one transducer, hitting the key 88 and 107 kHz frequencies anglers rely on — you get the flexibility of multiple sonar modes without multiple installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5–10X Greater Detail and Resolution\u003c\/strong\u003e — distinguishes individual baitfish, gamefish, and underwater structures with photographic clarity — you'll see exactly what you're looking at, not just a blob on the screen.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth Capability to 10,000 Feet\u003c\/strong\u003e — built for offshore and deep-water applications, but performs just as well in shallow lakes — no compromises at any depth you fish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedium-Frequency Beamwidth (24° to 16°)\u003c\/strong\u003e — wider cone at lower frequencies for broad coverage, tighter at higher frequencies for precision targeting — you get both area coverage and pinpoint detail in one unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20° Tilted Hull Mount\u003c\/strong\u003e — angles the transducer away from dead-zone turbulence directly under your hull — cleaner signal in rough water and when running at speed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 kW Power Output\u003c\/strong\u003e — enough punch to cut through noise and weeds, deliver crisp images in stained water, and maintain signal integrity in heavy boat traffic.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBronze Housing\u003c\/strong\u003e — corrosion-resistant thru-hull construction built to last in saltwater or freshwater environments — no early failure from electrolysis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth and Water-Temperature Sensor\u003c\/strong\u003e — logs both readings in real time, giving you temp data at multiple depths — critical for finding thermoclines and seasonal fish movement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXducer ID Technology\u003c\/strong\u003e — automatic transducer recognition simplifies installation and network integration — no manual setup or compatibility guessing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs \u0026amp; What's Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Works with Airmar-compatible fish finders and chartplotters that support broadband CHIRP transducers. This unit requires a Mix and Match cable sold separately — you'll need to verify your head unit's cable connector type before ordering. Not sure if this works with your setup? Call or text us at (833) 831-4077 — we'll tell you straight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBoat Specs:\u003c\/strong\u003e Rated for boats up to 36 feet with fiberglass or wood hulls. Bronze thru-hull installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn the Box:\u003c\/strong\u003e Airmar B175M transducer only. Mix and Match cable, mounting hardware, and installation fasteners must be ordered separately based on your specific hull type and fish finder connection.\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":45764301520953,"sku":"68018","price":1299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2685\/5225\/files\/68018XL.jpg?v=1777401295"},{"product_id":"airmar-b175m-transducer-chirp-bronze-0-tilt-1kw","title":"Airmar B175M Transducer CHIRP Bronze 0° Tilt 1kW","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWho This Is For:\u003c\/strong\u003e Tournament anglers, charter captains, and serious recreational fishermen running fiberglass or wood hulls up to 36 feet who need surgical-precision bottom detection and fish separation at depth. If you're fishing structure, suspended baitfish, or need to distinguish individual gamefish from the noise, this transducer delivers the resolution to see what others miss.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProduct Summary:\u003c\/strong\u003e The B175M is a thru-hull CHIRP transducer built on Airmar's broadband architecture — meaning one installation gives you 50 kHz of total bandwidth with dual frequencies (88 and 107 kHz) plus everything in between. You get bottom detection to 10,000 feet, 5 to 10 times greater detail than traditional single-frequency transducers, and the ability to pick individual baitfish out of a school. At 1kW power, it delivers clean, fast-response data even in rough water or at speed.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCHIRP Broadband (85–135 kHz)\u003c\/strong\u003e — transmits across a 50 kHz bandwidth in a single installation — you see substrate detail, fish size variation, and structure separation that single-frequency transducers simply can't resolve.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-Frequency Coverage (88 \u0026amp; 107 kHz)\u003c\/strong\u003e — covers the frequencies most fish finders use, with full bandwidth in between — flexibility to tune your display for shallow structure or deep offshore work without swapping hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 kW Power Output\u003c\/strong\u003e — strong, clean signal penetration even in rough seas, stained water, or at high boat speeds — your screen stays crisp and responsive when conditions matter most.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth Capability to 10,000 Feet\u003c\/strong\u003e — whether you're working 50-foot coastal structure or dropping into the abyss, this transducer reaches it — no limitations based on hull depth or water column.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBronze Thru-Hull Housing\u003c\/strong\u003e — corrosion-resistant construction rated for saltwater and freshwater; 0° tilt angle mounts flush for minimal drag — proven durability with no performance sacrifice.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Water-Temperature Sensor\u003c\/strong\u003e — fast-response readings track thermal breaks and seasonal patterns without a separate sensor installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXducer ID Technology\u003c\/strong\u003e — automatic transducer recognition and configuration — plug it in and your fish finder knows exactly what you've installed, eliminating guesswork on your setup screen.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs \u0026amp; What's Included\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Works with any CHIRP-capable fish finder that supports Airmar transducers — including Humminbird, Lowrance, Simrad, and Garmin systems with appropriate transducer connectors. Your fish finder's display must support broadband CHIRP frequencies in the 85–135 kHz range to unlock full capability. Not sure if this works with your setup? Call or text us at (833) 831-4077 — we'll tell you straight.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIn the Box:\u003c\/strong\u003e B175M bronze thru-hull transducer only. You'll need to purchase a compatible Mix and Match transducer cable separately — the cable connects to your fish finder's transducer port and must match both your transducer connector type and your display unit.\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":45764301619257,"sku":"68033","price":1299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2685\/5225\/files\/68033XL.jpg?v=1777401296"},{"product_id":"airmar-b175mw-transducer-chirp-20-tilted-element","title":"Airmar B175MW Transducer CHIRP 20° Tilted Element","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eBuilt for serious anglers targeting pelagic and mid-water species who need a wide-coverage transducer that won't break apart in rougher conditions. This is the right choice if you're running a Garmin system on a boat up to 36 feet and want to see everything in the upper to mid-water column — not just what's directly below you.\u003c\/p\u003e\n\u003cp\u003eThe B175MW is a 1 kW thru-hull transducer that shoots out a 57–73° wide cone (port to starboard) to blanket the water under your boat in real-time detail. Medium frequency (60–100 kHz) gives you the sweet spot between long-range reach and target separation — you'll see individual fish suspended in the water column instead of a fuzzy cloud. The tilted element design corrects for hull deadrise automatically, so you get maximum echo returns at all speeds.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedium Ultra-Wide Beamwidth\u003c\/strong\u003e — 57–73° port-to-starboard coverage means you see everything happening under your boat in one pass, not just a narrow cone — critical when you're drifting or trolling and don't want to miss suspended fish off to the sides.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60–100 kHz Medium Frequency\u003c\/strong\u003e — sits between shallow-water definition and deep-water penetration, with excellent fish-target separation so you can tell a 3-pound bass from a piece of wood at 100 feet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 kW Power with 400 Meter Depth Capability\u003c\/strong\u003e — enough punch to read bottom structure and thermoclines down to 1,300 feet; fast response even when you're moving at planing speed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20° Tilted Element Housing\u003c\/strong\u003e — automatically corrects for hull deadrise on boats with 16–24° deadrise, so the ceramic element stays vertical and you don't lose echo returns no matter what angle your hull sits at.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in Water Temperature Sensor\u003c\/strong\u003e — continuous temp reading lets you track thermoclines and seasonal patterns without adding another sensor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBronze Housing\u003c\/strong\u003e — won't corrode or weaken in saltwater or freshwater; works on stepped, planing, or displacement hulls; sits nearly flush with the hull for minimal drag and clean installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCHIRP Ready with Xducer ID Technology\u003c\/strong\u003e — compatible with modern Garmin CHIRP systems for frequency flexibility; Xducer ID automates transducer recognition on your display.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs \u0026amp; What's Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Garmin fish finders with 8-pin connector (8G). Not sure if this works with your Garmin system? Call or text us at (833) 831-4077 — we'll tell you straight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e Transducer with 9 m (30') or 10 m (33') cable. Install hardware sold separately if needed. Requires a thru-hull hole of 95 mm (3-3\/4\") on fiberglass or wood hulls.\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":45764301848633,"sku":"103517","price":1999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2685\/5225\/files\/103517XL.jpg?v=1777401297"},{"product_id":"airmar-b175mw-transducer-medium-ultra-wide-20","title":"Airmar B175MW Transducer Medium Ultra Wide 20°","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eBuilt for anglers targeting pelagic species and mid-water fish where you need wide coverage and precise target separation. If you run a center console or open boat and fish the upper to mid-water column — whether you're chasing stripers, tuna, or kings — this transducer delivers the beam width and frequency range to paint a clear picture of what's suspended beneath you.\u003c\/p\u003e\n\u003cp\u003eThe B175MW is a medium-frequency CHIRP transducer that combines ultra-wide side-to-side coverage (57–73°) with a narrow fore-aft beam (16° average). That geometry means maximum bottom-to-bottom view under your boat while maintaining the narrow cone you need when you're moving. The 60–100 kHz band excels at mid-depth performance and fish-target separation — you'll distinguish a school from debris and see individual fish in the 100–300 foot range. It's a thru-hull mount with a tilted ceramic element that self-corrects for hull deadrise up to 24°, so you get true vertical orientation and maximum echo return regardless of your hull's angle. One kW of power pushes signal to 400 meters (1,300 feet) in capable hands.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedium Frequency (60–100 kHz)\u003c\/strong\u003e — delivers superior mid-depth performance with excellent fish-target separation — you'll see the difference between a school and suspended structure at 150–300 feet, where many fish live.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltra-Wide Beamwidth (57–73° port\/starboard, 16° fore\/aft)\u003c\/strong\u003e — covers maximum area under the boat without losing target definition — ideal when you're moving and need full water column coverage in one pass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40 kHz Total Bandwidth from One Transducer\u003c\/strong\u003e — gives you detailed sonar across the entire frequency range without swapping units — simplifies your install and saves weight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 kW Power with 400-Meter Depth Capability\u003c\/strong\u003e — enough punch to reach deep offshore species and mark targets in open water — your electronics won't be the limiting factor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTilted Element Housing (20°, 12°, or 0° angle)\u003c\/strong\u003e — automatically compensates for hull deadrise — the ceramic element stays vertically oriented for maximum return signal, regardless of your boat's bottom design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Profile Bronze Thru-Hull Housing\u003c\/strong\u003e — mounts flush with the hull, minimizing drag and turbulence at speed — critical when running offshore or in rough conditions where clean water flow matters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in Water Temperature Sensor\u003c\/strong\u003e — tracks real-time temperature changes — helps you locate thermoclines and seasonal depth changes where fish congregate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCHIRP-Ready Single-Band Design\u003c\/strong\u003e — compatible with modern CHIRP-enabled fish finders — gives you the sonar clarity of swept-frequency technology when paired with compatible head units.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs \u0026amp; What's Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e This is a CHIRP-ready single-band transducer requiring a compatible CHIRP fish finder head unit. It pairs well with other Airmar medium and high-frequency models (like the B275LHW) if you want to layer multiple frequency bands for comprehensive water column interrogation. The bronze housing works on fiberglass or wood hulls with deadrise up to 24° and vessels up to 36 feet. Not sure if this works with your setup? Call or text us at (833) 831-4077 — we'll tell you straight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn the Box:\u003c\/strong\u003e B175MW transducer with 30-foot cable and integrated temperature sensor. Note: this transducer requires a Mix \u0026amp; Match cable connector — verify your fish finder's cable type before ordering.\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":45764301946937,"sku":"103516","price":1999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2685\/5225\/files\/103516XL.jpg?v=1777401299"},{"product_id":"airmar-b175mw-transducer-medium-ultra-wide-chirp-1kw-20","title":"Airmar B175MW Transducer Medium Ultra Wide CHIRP 1kW 20°","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWho This Is For:\u003c\/strong\u003e If you run a center console, express, or sportfish boat and want one transducer that handles the full mid-water column with exceptional clarity, this is your setup. Built for anglers targeting pelagic species, suspended structure, and fish in transition zones where you need real-time target separation and wide coverage at cruising speed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Summary:\u003c\/strong\u003e The B175MW is a 1 kW thru-hull transducer that combines medium frequency (60-100 kHz) with an ultra-wide beamwidth to put you on fish fast and keep you on them. The 20° tilted element corrects for hull deadrise automatically, meaning you get maximum echo return and crisp sonar images whether you're at idle or on plane. This is the workhorse transducer when you need mid-depth performance and a broad picture of what's underneath.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e60-100 kHz Medium Frequency\u003c\/strong\u003e — splits the difference between deep-water penetration and high-resolution detail — you get excellent fish-target separation in the 30-200 foot range where most pelagic action happens.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e57-73° Port-Starboard Beamwidth\u003c\/strong\u003e — ultra-wide coverage lets you see structure and baitfish to either side of your boat — critical for covering water fast without dead zones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20° Fixed Tilted Element\u003c\/strong\u003e — ceramic element is angled to match typical hull deadrise (16-24°) so sonar cone points straight down no matter how your hull is built — no guesswork, no misaligned transducers giving you false readings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 kW Power with 400m Depth Rating\u003c\/strong\u003e — enough juice to reach structure and suspended targets at depth while maintaining clarity at speed; tracks targets accurately down to 1,300 feet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Frequency Within Single Transducer\u003c\/strong\u003e — 40 kHz total bandwidth (60-100 kHz range) lets your sonar unit work with CHIRP technology for precision imaging and fast water-column interrogation without installing multiple transducers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Profile Bronze Housing\u003c\/strong\u003e — thru-hull design minimizes drag and turbulence at planing speeds; bronze construction resists corrosion in salt and brackish water without sacrificing signal strength.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast-Response Water Temperature Sensor\u003c\/strong\u003e — real-time temp readout helps you track thermoclines and seasonal baitfish movements without a separate probe.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs \u0026amp; What's Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e 12-pin Garmin connector only — works with current CHIRP-ready Garmin chartplotters and fish finders. If you run Humminbird, Lowrance, or Simrad, this transducer is not compatible. Not sure if this works with your setup? Call or text us at (833) 831-4077 — we'll tell you straight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e Available in 30-foot (9m) or 33-foot (10m) cable lengths. Mounting hole is 95mm (3-3\/4 inches). Rated for vessels up to 36 feet. Temperature sensor range -10° to 40°C. Weighs 6 lbs. Made in the USA.\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":45764302176313,"sku":"103573","price":1999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2685\/5225\/files\/103573XL.jpg?v=1777401301"},{"product_id":"airmar-b175mw-transducer-medium-ultra-wide-chirp-20","title":"Airmar B175MW Transducer Medium Ultra Wide CHIRP 20°","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eBuilt for serious anglers running 20 to 36-foot boats who need wide coverage of the mid-water column—especially when you're targeting pelagics, suspended fish, or anything in the 60 to 400-foot depth range. This transducer pairs perfectly with a Furuno TZTouch3 system and works best when you want medium-frequency performance without sacrificing the breadth of your sonar picture.\u003c\/p\u003e\n\u003cp\u003eThe B175MW is a tilted-element thru-hull transducer that delivers a 57 to 73-degree port-starboard beam—one of the widest medium-frequency patterns available. It runs at 1 kW with 40 kHz of total bandwidth, giving you the separation you need to pick individual fish out of a crowd while covering massive ground under your boat. The 20-degree tilt corrects for typical hull deadrise, so you get clean vertical returns even when you're running.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltra-wide 57–73° port-starboard beamwidth with 16° fore-aft coverage\u003c\/strong\u003e — you see everything under the boat and well to both sides, perfect for locating wide-spread structure and suspended gamefish without panning the transducer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedium frequency 60–100 kHz\u003c\/strong\u003e — superior mid-depth performance and excellent fish-target separation, so you're not fooled by baitfish clouds or thermocline noise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 kW power with 40 kHz bandwidth from a single transducer\u003c\/strong\u003e — enough punch to reach 400 meters (1,300 feet) and enough frequency range to work everything from 60 up to 100 kHz without switching units.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTilted-element design with fixed 20° angle\u003c\/strong\u003e — corrects for hull deadrise automatically, meaning your sonar reads vertically even at cruise speed instead of firing backward or forward at an angle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBronze thru-hull housing\u003c\/strong\u003e — proven durability on stepped, planing, and displacement hulls; flush installation minimizes drag and keeps resolution sharp when you're moving.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast-response depth and water-temperature sensors\u003c\/strong\u003e — real-time feedback on bottom structure and thermal layers so you can fish the breaklines and layers where fish actually live.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXducer ID technology\u003c\/strong\u003e — automatic transducer identification with your TZTouch3, eliminating manual configuration hassles and ensuring you're always running the right frequency settings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs \u0026amp; What's Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Furuno TZTouch3 12-inch and 16-inch displays only. The 12-pin connector is specific to Furuno; this will not work with Lowrance, Simrad, Garmin, Humminbird, or other sonar systems. Not sure if this works with your Furuno setup? Call or text us at (833) 831-4077—we'll tell you straight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e The B175MW transducer with 9-meter (30-foot) or 10-meter (33-foot) cable options. You'll need a TZTouch3 display and a compatible thru-hull installation (requires a 95 mm \/ 3.75-inch hole). The transducer is rated for boats up to 11 meters (36 feet) LOA.\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":45764302274617,"sku":"103572","price":1999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2685\/5225\/files\/103572XL.jpg?v=1777401302"},{"product_id":"airmar-b265lh-transducer-bronze-chirp-1kw-thru-hull","title":"Airmar B265LH Transducer Bronze CHIRP 1kW Thru Hull","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eBuilt for serious offshore and inshore anglers running boats 25 feet and larger who need to identify specific fish species and structure at all depths. If you're chasing bluefin, cod, squid, or hunting deep canyons and seamounts, this transducer gives you the frequency control and target separation that separates productive days from wasted fuel.\u003c\/p\u003e\n\u003cp\u003eThe B265LH is a dual-frequency CHIRP transducer that covers 103 kHz of total bandwidth — everything from 42 kHz to 210 kHz — in a single bronze housing. That means you're not switching transducers or compromising beam angles. You get extreme target detail, bottom discrimination, and the ability to dial in the exact frequencies commercial fishermen use to hunt specific species. Pair it with a tunable fish finder and you'll mark fish with confidence, not guesswork.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Frequency CHIRP Array (42–65 kHz)\u003c\/strong\u003e — seven-element ceramic operates across a 25° to 16° adjustable beam — covers your entire water column with exceptional detail and adapts beam width as you tune frequencies up and down the band.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Frequency Ceramic (130–210 kHz)\u003c\/strong\u003e — narrow 10° to 6° adjustable beam delivers pinpoint target resolution — the tight beam cuts through clutter and isolates individual fish and small baitfish balls.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e103 kHz Total Bandwidth\u003c\/strong\u003e — one transducer covers every frequency you'll need, including the commercial-grade 50 kHz and 200 kHz that work for specific species — no swapping hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Performance Fairing Block\u003c\/strong\u003e — maintains clean broadband performance at speeds over 30 knots without signal degradation — your data stays solid even at cruise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth and Water Temperature\u003c\/strong\u003e — built-in sensors feed real-time temperature and bottom information to your display — essential for tracking thermoclines and baitfish migration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXducer ID Technology\u003c\/strong\u003e — automatic transducer recognition eliminates guesswork during installation — plug it in and your fish finder identifies it correctly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs \u0026amp; What's Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Works with any tunable CHIRP fish finder that accepts Airmar transducers and supports 42–210 kHz operation. Your fish finder must have Xducer ID compatibility to auto-recognize this unit. Not sure if this works with your setup? Call or text us at (833) 831-4077 — we'll tell you straight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Thru-hull mount for fiberglass or wood hulls. Requires a mix-and-match cable (sold separately) — connector type depends on your specific fish finder display. Confirm your display's cable requirements before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn the Box:\u003c\/strong\u003e B265LH transducer with bronze housing, High-Performance Fairing Block. Cable sold separately.\u003c\/p\u003e\n","brand":"Airmar","offers":[{"title":"Default Title","offer_id":45764302340153,"sku":"68019","price":2069.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2685\/5225\/files\/68019XL.jpg?v=1777401304"}],"url":"https:\/\/www.depthsource.com\/collections\/transducers.oembed","provider":"Depth Source","version":"1.0","type":"link"}